1 / 6
Sovol Zero Minimalist Toolhead Shroud - "The Power Loader" — image 1
1 / 6

Sovol Zero Minimalist Toolhead Shroud - "The Power Loader"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A minimalist shroud with improved airflow. Compatible with the K2 + hotend upgrade.

Rating
5 / 5
Likes
5
Downloads
11
Makes
1
Views
118
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

    This is a minimalist toolhead shroud that is compatible with the K2 + hotend upgrade. It should also work fine with the oem hotend. This allows for (to my eyes) better part cooling and better visibility of the nozzle during printing. This shroud is also compatible with @shoeys_2048431 's Belt Clamps

Please note, I use a smaller 2510 hotend fan, which works just as well as the oem. I have not test fit this with the oem hotend setup, but it shoud fit fine.

You'll want to glue a pair of 4x2mm magnets into each hole of the 4 holes. Be careful to match the magnet polarity to the toolhead.

You can find the mcu fan mount here.

Print Settings:

  • 4 walls

  • 30% gyroid infil

  • ABS, ASA, PPA-GF, or any other heat resistant filament.

Print face down with painted supports on the green areas. Depending on your filament, you may be able to get away with not adding supports to the clips.

Tags