Sabrent HB-BUP7 or HB-BU10 USB Hub Mount for Sim Rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SABRENT HB-BUP7 or HB-BU10 USB hub mount for 80×40mm sim rigs. Space-saving design with easy port and switch access.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D-printable mounting bracket for the SABRENT 7-Port USB 3.0 Hub with Power Switches (HB-BUP7), designed to mount the hub directly to an 80 × 40 mm aluminum extrusion profile on a sim racing rig.
The bracket provides a clean and space-saving solution for mounting the USB hub while keeping all USB ports and individual power switches easily accessible.
Compatibility
Designed for:
SABRENT USB 3.0 Hub with Power Switches
Model: HB-BUP7, HB-BU10
7 × USB 3.0 ports
Up to 5 Gbps transfer speed
Hub dimensions: approx. 106.7 × 48.3 × 23.9 mm
Official product page: https://sabrent.com/products/HB-BUP7
Sim Rig Compatibility
The mounting bracket is designed for 80 × 40 mm aluminum extrusion profiles.
Aluminum profile: 80 × 40 mm
Mounting screws: M8, M6
Profile type: T-slot aluminum extrusion
Please check your specific profile and T-slot dimensions before installation, as extrusion profiles can vary between manufacturers.
Recommended Printing Settings
The bracket is designed for standard FDM 3D printing.
Recommended settings:
Layer height: 0.20 mm
Walls/perimeters: 3–4
Infill: 20–30 %
Supports: YES
Material: PLA, PETG or similar
For a sim racing rig, PETG or another mechanically stronger material is recommended if the bracket is subjected to frequent loads or vibration.
Disclaimer
This is an independently designed third-party mounting bracket and is not affiliated with or endorsed by SABRENT.
The SABRENT HB-BUP7 is a commercially available product from SABRENT.