Latch Replacement for FHC C1123 Sliding Door Handle Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for latch mechanism of the FHC C1123 Sliding Door Handle Set. (spring, and rail guide not included).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is replacement for latch mechanism of the FHC C1123 Sliding Door Handle Set. (spring, and rail guide not included).
The original die cast version had a weak point in the center of the finger grove that snapped. While it's probably less time consuming to just replace the entire latch set, this falls into the spirit of "fix over replace"
Design is altered from original for stronger support, and removing part complexity not needed for function or printing efficiency.
Feel free to remix if your model is slightly different or better fit your needs.
Assembly Tips:
Assembly may require sanding on the top "fork" side of the latch along with a type of grease or lubricant.
Needle Nose pliers for the spring and rail guide will make your life easier.
Hole is prepped for self threading. A hand drill with a screwdriver bit will get it in there. DO NOT OVER TIGHTEN.
Disclaimer:
This is not stress tested for brute force entry. This is just to have the lock functional again for a stronger window seal. If security is a concern, consider a security bar.