1 / 2
Shetland Sheepdog Keychain — Sheltie Portrait Charm — image 1
1 / 2

Shetland Sheepdog Keychain — Sheltie Portrait Charm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sheltie you can actually recognise as a sheltie.

Rating
0 / 5
Likes
4
Downloads
6
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

A sheltie you can actually recognise as a sheltie.

A Shetland Sheepdog head keychain with the breed markings that matter: the long mane around the

neck, the fine tapering muzzle and the tipped ears. The coat is cut as individual strands rather

than a smooth shell, which is why it needs a 0.2 mm nozzle and why it looks like fur instead of a

lump. The loop is modelled into the print.

Why you will like it

- Real breed markings — the mane, the muzzle taper and the tipped ears are what separate a sheltie

from a collie — all three are in there.

- Fur that reads as fur — the coat is cut in strands, which is exactly the detail a 0.2 mm nozzle

keeps and a 0.4 mm one loses.

- One piece, no assembly — loop included; add a split ring and it is a gift.

- Pocket-sized — about 50 mm tall, so it hangs on keys without being a brick.

- The obvious dog-owner gift — print it in the owner's dog's colour — sable, tricolour or blue

merle all work in single-colour PLA.

Print settings

- Nozzle: 0.2 mm — this is the one setting that matters. The whole model is built around a 0.2 mm

nozzle: the panel lines, the coat strands and the loop all come out crisp. A 0.4 mm nozzle prints

it, but the fine detail turns mushy and the smallest cuts close up completely.

- Layer height: 0.1 mm (first layer 0.1 mm as well)

- Walls: 4 · Top shell: 7 layers · Infill: 15 % grid

- Supports: tree (auto), slim style, threshold 30°. The chin, the ear tips and the underside of the

mane overhang, so leave supports on. Tree supports come away from the fur without flattening it.

- Brim: auto · Raft: none

- Material: PLA. Silk and matte both look good; matte hides the layer lines best.

- Outer wall around 120 mm/s. Slower does not buy you much at 0.1 mm, but a clean, well-levelled

first layer does.

Tags