1 / 2
Flex Hose Couplers—2.5” and 4” Versions — image 1
1 / 2

Flex Hose Couplers—2.5” and 4” Versions

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-piece threaded coupler to connect your dust collection flex hoses seamlessly without the hassle of metal hose clamps

Rating
0 / 5
Likes
2
Downloads
8
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Say goodbye to awkward, overtightened hose clamps and messy tape. This functional coupler system is engineered to join two 2.5” or 4” flex hoses directly and securely. 

The ingenious two-piece design features two identical threaded coupler halves joined by a central alignment ring, allowing you to print the entire assembly flat on the bed with zero supports required. While it offers a tight friction press-fit during assembly, applying some glue between the components is recommended for permanent workshop durability under heavy tension.

 

Dimensions

  • Port OD: 2.5” and 4”

  • Port ID: 2.25” and 3.75”

  • Port Height: 1.25”

  • Wall Thickness: 0.125”

  • Stop Flange OD: 3” and 4.5”

  • Stop Flange Height: 0.38”

  • Total Height: 2.5”

 

Print Settings

  • Orientation: Print with the flat profile side directly on the build plate. No supports needed.

  • Material: PETG or ABS/ASA (Highly recommended for workshop durability and impact resistance. While PLA can work, it may creep or warp over time under constant hose tension or elevated shop temperatures.

  • Layer Height: 0.12mm to 0.20mm

  • Wall Loops / Perimeters: 4+. Extra perimeters add significantly more functional strength to threaded joints than cranking up infill percentages alone.

  • Infill: 20% or higher (Gyroid or Grid pattern recommended for strength).

Explore More Workshop Upgrades

Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:

Tags