1 / 4
Snapmaker U1 Feet for Original Top Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These TPU feet are designed to replace the original silicone inserts, to hold the original top cover securely in place.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 182
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Unfortunately, the original top cover does not fit properly with the silicone inserts because the gasket is too thick or the inserts are too low.
These TPU feet are designed to replace the original silicone inserts. They hold the original top cover securely in place while still allowing the gasket to seal properly.
I used A85 TPU. Make sure the TPU filament is completely dry before printing.
Print settings:
1 wall
10% gyroid infill
3 top/bottom layers