WLED Water Lamp Stand (ESP8266 & WS2812B 8x8 Matrix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact base for ESP8266 and 8x8 WS2812B matrix running WLED. Turn any textured glass vase into a mood night light.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A minimalist standalone lamp base designed to transform a standard textured glass vase filled with water into an ambient, diffused mood lamp or night light.
The enclosure houses an ESP8266 (D1 Mini / ESP-12) development board and an 8×8 WS2812B RGB LED matrix (64 LEDs) controlled via the popular WLED open-source firmware. Placing a patterned glass vase with water on top creates dynamic, organic light refraction patterns across the room.
Dimensions & Compatibility:
Base Diameter: 100 mm (fits vases with a base diameter up to ~100 mm)
LED Pocket: Sized specifically for standard WS2812B 8×8 square matrix modules
Electronics & Components:
Controller: ESP8266 (e.g., D1 Mini form-factor) flashed with WLED
LEDs: WS2812B 8×8 (64 LED) square matrix panel
Power: 5V USB power supply / cable
Diffuser / Shade: Any patterned or textured glass vase with a base diameter ≤100 mm (add water for maximum dispersion)
Assembly & Wiring:
Solder 5V, GND, and Data In lines from the ESP8266 (typically GPIO2/D4) to the WS2812B matrix.
Route the USB power cable through the integrated side cutout.
Fit the ESP8266 board into the lower internal cavity.
Press-fit or adhere the LED matrix flush into the top square pocket.
Print Settings:
Material: PLA or PETG
Layer Height: 0.20 mm
Infill: 15–20% (Grid / Gyroid)
Perimeters/Walls: 2–3
Supports: No supports needed (prints flat on the bed)
