Dustboot for 80mm spindle and 4" suction hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dustboot for 80mm spindle and 4" suction hose, don't adapter it down from 4", use a true 4" connector, get full flow.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Had a small boot for my Onefinity cnc with 80mm spindle, but got a dust collector that uses 4" hose. Rather than neck it down from 4" to about 2", wanted a 4" straight through, to get the full suction.
So I drew this up, played with it a bit. May be some revisions down the road, who knows.
For brushes that fit in snugly i used Easy-Cut Strip Brush 7/32" wide x 3/16" backing. It comes in 1", 2" and 3" from McMaster-Carr.
Magnets to hold the foot onto the boot are 4.5mm x 4.5mm N50 magnets.
I print on a Sovol SV06 Plus ACE.
*For personal, non-commercial use. Commercial sale of this design or physical prints made from it is not permitted without permission from me.