Bag Hook for MINI Cooper F56 (2014-2026) - Air Vent Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bag Hook that clips into the air vent of a MINI Cooper F56 (2014-2026).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Bag Hook that clips into the air vent of a MINI Cooper F56 (2014-2026).
A hook for a shopping bag, so it does not tip over on the floor of the passenger side. Rated for light bags up to about 0.75 kg (a takeaway bag, a small grocery bag) - the vent slat clip is the weak link, so keep heavy shopping in the boot.8, which means it will not snap on the first pothole.
Nothing to buy - one printed part.
FITMENT
This car has ROUND turbine vents, so instead of a blade clip you get a ring collar with three sprung fingers that grip the vent bezel.
The jaw is deliberately sprung rather than a fixed slot, because real vent blades vary between cars and even between the left and right vent of the same dashboard. If it ends up tight, it is meant to be - it holds by friction and should need a firm push.
MATERIAL - THIS ONE MATTERS
Print in PETG or ASA. Not PLA. A parked car in the sun goes past 60-70 C inside, and PLA starts to soften around 55 - a PLA clip will sag off the vent, taking whatever it was holding with it. This is not a preference, it is the condition for the part working at all.
Settings: 0.2 mm layers, 4 perimeters, 30% infill, no supports. Print as oriented - the whole part is one extruded profile lying on a flat face, and the spring jaw bends in the plane of the layers, which is the only orientation that survives repeated clipping.
Not affiliated with, endorsed by, or connected to any vehicle manufacturer. Brand and model names describe fitment only.
