Strong Articulated Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong adjustable arm designed to hold heavy cameras, microphones, lights and other equipment.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 1
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This articulated arm prioritizes strength and stable support over effortless movement.
Tighten the joint screws firmly for maximum holding force, or leave them slightly looser for smoother movement and easier repositioning.
It uses countersunk holes for flush conical-head Torx screws. Or in Flat folder for hex head screws
Recommended settings: 33% Adaptive Cubic infill, 4 wall loops and PETG or a stronger material.
Fuzzy Skin with “Contour only” can be tested on some joint parts to increase friction. Do not use it on the final end fittings or equipment adapters, as these require accurate dimensions.
You can do any adapter for any tool by just adding a 30mm sphere
The current joints have a limited movement angle. More connection options, including a 90° elbow, will be added later.
This arm is mainly designed to hold microphones, cameras and similar equipment securely in a fixed position. It prioritizes strength and stability over frequent or effortless repositioning.