Cold Snap Desk Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Streamline card sorting, grading, and live breaks with organized bays across Standard, Pro, and XL editions.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Tired of loose penny sleeves sliding around your desk mat or toploaders cluttering your workspace during breaks? The Cold Snap Desk Caddy keeps your primary card supplies upright, sorted, and ready right within arm's reach. Built with a low-profile base and recessed front cutouts, you can pinch and slide a single sleeve or case out smoothly without fumbling or bending any corners.
It fits standard trading card prep workflows cleanly, holding 100+ soft penny sleeves flat against the floor alongside dedicated compartments for standard 35pt rigid toploaders and semi-rigid grading holders (like Card Savers). Choose between the compact Standard daily edition, the expanded Pro Station with built-in stream tool bays, or the high-capacity XL Stream Edition.
Files are open-source and customizable via OpenSCAD under the Cold Front Forge project.
EDITIONS & FILES
Standard Edition: Compact footprint (170 x 104 mm) holding penny sleeves, ~35 toploaders, and ~45 semi-rigids. Fits nearly any print bed (180 x 180 mm+).
Pro Station: Streamlined break station (171 x 146 mm) with a deep toploader pocket (~70+), penny sleeves, semi-rigids, and dual rear utility bays for tape, markers, and pull tabs. Prints flat on standard 220 x 215 mm+ beds.
XL Stream Edition: High-capacity double station (244 x 146 mm) with two flat penny sleeve bays, deep toploader storage, and wide rear tool trays. Requires a 256 x 256 mm+ bed (or 45-degree slicer rotation). Untested physical print due to current machine size limits.
RECOMMENDED PRINT SETTINGS
Orientation: Flat on the build plate (no supports needed).
Material: PLA, PLA+, or PETG.
Layer Height: 0.20 mm.
Walls: 3 or 4 perimeters.
Infill: 15% Gyroid or Grid.
Designed by Cold Front Forge. Open-source under Creative Commons (CC BY-NC-SA 4.0).