Core One feet with switch furniture gliders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Practical feet for the CoreOne with power switch. Vibration damping was achieved with furniture gliders.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 1
- Views
- 163
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Practical stands for the CoreOne.
The stand without a switch can be mounted on any corner of the CoreOne.
The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is required.
For mounting, simply replace the screw from the housing with a longer M3 screw (M3x20-25) and screw it in directly.
I also added a thin piece of double-sided adhesive tape.
Screw the feet onto the printer, and then stick on the furniture glides.
The connection of the power switch must be carried out by an electrician or specialist with appropriate training. Incorrect handling can lead to injuries or damage the printer.
I use a standard switch with a size of 31x25.5.
A cable attachment is also included in the data.
https://www.amazon.de/dp/B0DHBTCG1H?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1