Snapmaker U1 Tools - Snapmaker Tool Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Precision maintenance accessories designed to simplify the safe removal and replacement of the Feeder and Toolhead PTFE
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 97
- Makes
- 3
- Views
- 310
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Snapmaker PTFE Removal Tools
Precision maintenance accessories designed to simplify the safe removal and replacement of the Snapmaker U1 Feeder and Toolhead PTFE tubing.
Included Tools & Hints for Printing:
FEEDER PTFE Disconnect - Remove PTFE tube from the Feed Motor and rear of Printer.
TOOLHEAD PTFE Disconnect - Remove Larger PTFE tube from the Snapmaker Toolhead. If you want to up your cool game, use 6x2mm Magnets. Pay close attention to the magnets polarity (all should face same direction/polarity). They're designed to fit magnets snugly, but you might need a little CA glue.
LUBE TOOL: The Lube Helper tool will apply the perfect layer of lube on the lead screws on z axis.
HINT: Having an issue with letters not sticking to build plate? Clean the build plate. Use a very light amount of glue stick or Nano Polymer. Be sure you are using my profile or slow down the first layer even more (should not be required)
QUALITY HINT: Smooth build plates will resolve better quality text and other fine detailed first layers.
PRO TIP: Set slicer to textured (even with smooth plates) for that extra squish.