Boreas - Bondtech LGX/ Mosquito mount with BLTouch- MGN rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the V1 Boreas mount I have put together for the LGX extruder. All parts are attached together with M3 screws…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 758
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is the V1 Boreas mount I have put together for the LGX extruder.
All parts are attached together with M3 screws and nuts.
The BLTouch is located 32.35mm to the right of the nozzle, and 15.25mm behind it.
The duct can be raised and lowered with by adjusting only 1 screw, and the blower fan is a 5015.
The mount bolts directly to MGN12 linear rails.
Print Settings
Printer:
Tevo Tornado
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20
Filament:
Overture PLA
Black
Notes:
All models should import into the slicer in the best orientation for printing. The duct requires support while the other models can be printed without support (with a well tuned printer)
Category: 3D Printing