WallFrame Dashboard — Framework Laptop 12 Mainboard Wall-Mount Server Frame (Support-Free)

Mount your Framework Laptop 12 mainboard on the wall like a dashboard. WallFrame is a slim (20 mm deep), support-free two-part frame: the board sits parallel to the wall with its full surface visible, all four USB-C ports open through full-width rail notches, a 30 mm cable-exit channel at the bottom, and a 5 mm ventilated air gap behind the board. Four tapered keyhole slots take #8/M4 pan-head wood screws (pinwheel layout resists pull-out in all directions).

PRINTING

- Two parts: wallframe_back.stl + wallframe_top.stl (244 x 150 mm each), both fit a 256 mm bed

- Print flat, face-down, no supports, no overhangs beyond 45 degrees

- PLA / PETG / ASA; 3 walls, 15-20% infill, 0.2 mm layers

HARDWARE

- 4x M3 heat-set inserts (5.7 mm long, 4.0 mm OD)

- 4x M3x10 mm socket-head screws

- 4x M1.6x6 mm pan-head screws (replace the factory captive screws)

- 2-4x #8x1-1/4 in or M4x30 mm pan-head wood screws (wall mounting)

IMPORTANT - PLEASE READ

Designed from Framework's official reference CAD only (FRAMEWORK_LAPTOP_12_MAINBOARD_V01.stp, CC BY 4.0) - NOT physically test-fitted or test-printed; all images are renders. Tolerances are conservative; please print a small tolerance coupon (4.1 mm insert bore + board-edge profile section) and dry-fit before the full print.

Attribution: based on Framework Laptop 12 reference CAD (c) Framework Computer Inc. (CC BY 4.0). Shared under CC BY 4.0.