1 / 8
Heltec V4 Meshtastic LoRa GPS Rugged Case 2x18650 by Alex_B
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original case design that started it all for the Heltec V4 Lora board.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 120
- Makes
- 2
- Views
- 604
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My first original design.
Print the front and back parts with supports at a 45-degree angle. Print the frame lying flat.
Assembly requires:
6x M3 heat-set inserts
1x 2.9 mm light pipe
1x 1S 9A BMS board
10x M3x6 DIN 912 hex socket head screws
2x M3x10 DIN 7991 countersunk screws
1x Slide switch
2x 18650 batteries