Zip Tie Mounts (x10)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable tie mounts for ties up to 5 mm: stick them with foam tape or screw them with M3 screws.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Cable tie mounts for ties up to 5 mm: stick them with foam tape or screw them with M3 screws.
24 × 24 × 5.5 mm
Tunnel 5.4 × 1.9 mm
Two Ø3.4 holes
How it was checked
The tie tunnel is a short 5.4 mm bridge. Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 38 min, 17 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Bases para bridas, juego de 10. Sin soportes: 38 min, 17 g.
العربية
قواعد لأربطة الكوابل، ١٠ قطع.