RC Ride Height Gauge easy build design for (1:10) max. 24mm Rideheight Version 1.4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found several Designs on the Internet but I wanted to challenge myself ... Version 1.4 with parts of upcoming 1.5
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
The ride height gauge is designed in freecad. The file is still a horrible mess so I only uploaded the export files yet. I printed it in PLA but be aware mine is allready missaligned cause the sun was warping the gauges measure finger (wippe). So I highly recommend to use ABS or ASA - at least for the finger. Or even better material if you are able to print.
The gauge should be very accurate in context of Offroad and you should check it, first time with a caliber.
I used 2,5mm screws with 5mm length to build it together, but nearly any small screws should work.
You may adjust the distance pieces which are designed seperate so you can drill bigger holes or even use fancy inserts.
I will try to switch to english naming of the parts in the next version!
You will need:
at least 10 screws 2,5mm ~5 or 8mm long
print the plain back plate (Deckel-links)
print the front plate (Deckel-rechts plane version or colored version)
(you could print a plain backplate and use a marker for several heightsprint at least 4 distance parts
print one finger in ABS or PLA HT (Wippe)
print 2 "bearings" with flantsch
All the parts have a slightly "play" to work
I originally wanted to use bearings I had around, but I dropped one into the basket and have never seen it again. So I printed some and it works nice.
It seems that the summer season is closed, so keep an eye on my work, I will try to release some RC Helper Tools in the winter season ;-) I just need time to cleanup the files ...
Have fun racing!