Gakken Worldeye Replacement Internal Cooling Fan Mount Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mechanical snap-fit shroud mount to securely fix in place the factory hot-glued internal cooling fan
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a custom-designed mechanical bracket to fix and upgrade the internal cooling fan setup on the Gakken Worldeye.
The original factory 25mm fan is held in place only by hot glue on a raised plastic platform. Over time, the heat causes the glue to fail, causing the fan to detach, rattle, or stop cooling effectively.
I engineered this slide-in shroud mount to firmly trap the standard fan. This bracket features built-in mounting tabs with screw holes so you can lock the entire assembly down securely using self-tapping screws.
The mounting tabs are intentionally designed with a slight amount of built-in mechanical flex. This ensures that even if the factory plastic platforms vary slightly in thickness or alignment difference, the bracket will adapt and snap/screw into place.
Infill: 15% to 20%
Supports