IKEA SKÅDIS coin organizer (parametric, no supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SKÅDIS-compatible coin organizers. No supports needed. Tested with EURO and Czech coins
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I hung a SKÅDIS board next to our door, but noticed that my catch-all shelf got quickly filled with coins (since I prefer a minimalistic wallet), and also that when I needed specific ones, I could never find which I needed. This model solves both problems.
Incredibly, the pegboard contest got announced 2 days after my first experiment, so this is my best shot.
Recommended print settings
Default orientation
No supports
2 perimeters
Bridges will not anchor correctly with more in PrusaSlicer
PLA
Highly recommended for bridging quality
Bridging speed 10 mm/s
Alternatively you can try playing around with the bridge flow ratio, but I got saggy fronts when increasing it
0.2 mm layer height + 0.4 mm nozzle
The model is optimised for that specific layer/nozzle combo. If you want to fine-tune for a different setup, set
VerticalWallandHorizontalWallparameters according to the values recommended by your slicer
(Manual) mouse ears or brim
I tested both, the supplied project uses manually-added mouse ears, but even the brim is not that hard to remove with a scalpel or sharp knife

Printed on a Prusa MK4S with Prusament Pristine White PLA; see the attached .3mf.
Versions
I tested the following configurations.
EUR: 25.75 mm (2 €), 23.25 mm (1 €), 24.25 mm (0.50 €), 22.25 mm (0.20 €), 19.75 mm (0.10 €), 21.25 mm (0.05 €)
CZK: 27.5 mm (50 Kč), 26.0 mm (20 Kč), 24.5 mm (10 Kč), 23.0 mm (5 Kč), 21.5 mm (2 Kč), 20.0 mm (1 Kč)
I also included the following configurations, which I could not test on physical coins:
AUD: 20.5 mm (2 $), 25 mm (1 $), 31.65 mm (50 ¢), 28.65 mm (20 ¢), 23.6 mm (10 ¢), 19.41 mm (5 ¢)
CAD: 28 mm (2 $), 26.5 mm (1 $), 27.13 mm (50 ¢), 23.88 mm (25 ¢), 18.03 mm (10 ¢), 21.2 mm (5 ¢)
GBP: 28.4 mm (2 £), 23.43 mm (1 £), 27.3 mm (50 p), 21.4 mm (20 p), 24.5 mm (10 p), 18 mm (5 p)
JPY: 26.5 mm (500 ¥), 22.6 mm (100 ¥), 21 mm (50 ¥), 23.5 mm (10 ¥), 22 mm (5 ¥), 20 mm (1 ¥)
And some 5-coin sets:
USD: 26.49 mm (1 $), 30.61 mm (0.50 $), 24.26 mm (0.25 $), 17.91 mm (0.10 $), 21.21 mm (0.05 $)
I had to manually tweak this a bit as the design did not count with such large changes between coins
CAD: 28 mm (2 $), 26.5 mm (1 $), 23.88 mm (25 ¢), 18.03 mm (10 ¢), 21.2 mm (5 ¢)
I heard you guys don’t like your 50 ¢ coin?
Feel free to ask if you are interested in other variants.
Custom values
Change the Coin1–Coin6 parameters and CoinTolerance to how close of a fit you want (I preferred 0.2 mm).

The other parameters should also work to some extent, but I'm not much of a CAD wizard, so I'm sure the model will break at some point.
Changing the amount of coins is not parametrisable (as I have no idea how to possibly do that in Fusion) but it should be fairly straightforward to extend/remove from the top and bottom sketches. I also included a 5-coin version.
Changelog
2026-10-13: improve behaviour with different coin sizes, add AUD, CAD, GBP, JPY
2026-10-14: add 5-coin version, USD and 5-coin CAD variants