Counting matching models…
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Downscaled to Z scale. Tractor details were reinforced so could be printed at this scale. Trailer was designed mainly from photos and actual fuel trucks specs.
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…
This is a full size model based on measurement from an actual euro-palet. Scale it down to needed size in slicer, for example 1.149% for 1:87 scale:
Ce support permet de recharger une montre Samsung Watch lorsque l'on a mis un bracelet qui ne s'ouvre pas en 2 parties
Adaptateur pour sortie climatiseur (air chaud / air froid) pour gaine Ø150 mm Buse 0.4 mm PLA ou PETG Sans support Couche 0.3 “Draft” Remplissage 15% gyroïde 3 périmètres Assemblage: 11 vis TH M4x12 11 écrous M4 22 rondelles M4 Le pieds…
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
update 2025-10-25: i re-sliced the models to use Input Shaper, which Prusa added after i first published this model. the design is unchanged. attribution (Markdown text) [EUR coins and bills box](https://www.printables.com/model/916773)…
Cache - Plaque - Enjoliveur pour l'interrupteur de modèle Essensya de la marque Hager.
Pièce porte bouteille ou porte journaux se situant sur la porte de la cellule d'un camping-car Eura Mobile de 2011 Print instructions Impression en PLA, mais peut très bien être imprimé en Pet-G, ABS ou CPU. J'ai mis une jupe donc il sera…
Spent a bunch of time, threw out a few designs as false starts and finally ended up with a model that works! These are 5mL eyedroppers printed in PETG with graduation marks every 1mL. I actually think they look kinda cool, which is not…
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .
H0 scale - 188 mm Platform complement (height) - thanks to phildc (3rails.com) To be glued on the previously published here (1222647) low concrete platforms No support needed Complement de 188 mm pour quai de voyageurs (hauteur) - merci à…
J'ai conçu des clips de 30 mm de longueur spécialement pour accueillir les connecteurs ARGB/RGB, garantissant une fixation sécurisée et fiable lors de vos montages. Grâce à leur conception innovante, ces clips ne nécessitent aucun support…
Keurig K-Supreme spacer to prevent coffee to splash out of your cup
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
I used PLA, no brim (nor support).
Le moteur Puretech a très mauvaise réputation du fait de sa courroie de distribution, qui, sur certains véhicules, se délite au bout de quelques dizaines de milliers de km. Un contrôle de la dite courroie peut se révéler salutaire. La…
I have chosen this wonderful painting as the next in my sequence of colour prints because it is Seurat's Pointillism that partly inspired me to embark of this project. Please read the description for "Starry Night" for how all the print…
Intro This model solves the problem of having multiple game variants with the 15th anniversary version. You can print this insert card organizer and never have your cards shuffled together again! Model description The organizer fits in…
I am a coin collector so i wanted a piggy bank for my 2 Euro double coins and combined it with a display. It holds up tp 16 coins in the walls and has plenty of room in the middle to store the rest of the double coins you have. happy…
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
ça roule sous la main comme une sphère. Pour plus d'informations : https://fr.wikipedia.org/wiki/Solide_d'%C3%A9paisseur_constante
Pot avec verseur de Ø 40 mm sur 35 mm de hauteur épaisseur 1 mm. S'imprime en 20 mn sur du PLA en mode rapide. Support obligatoire sur le bec. Gcode pour ELEGOO Neptune 3 PRO
A la suite d'un geste brusque le verre du diffuseur s'est brisé. Plutôt que de racheter un diffuseur, j'ai préféré refaire le verre. Pas de difficulté à imprimer, sinon que prendre un fil PLA translucide.
Enjoliver un enjoliveur ;-) de roue tôle avec un logo blanc et noir collé au centre de celui-ci
Diesen Trichter habe ich genau so erstellt, dass er auf den 57 mm Siebträger einer Lelit-Espressomaschine (bei mir: Grace) passt. Dabei habe ich darauf geachtet, dass er innen bündig ist und außen begrenzt ist, damit innen das Pulver bis…
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…
The only change to the original guillotine model is the whimsical addition of the fleur-de-lis (because, you know, it's a guillotine)… I crack myself up… The guillotine function is not affected and its assembly and required parts are…
Idéal pour customiser une chaîne de téléphone ou réaliser des bijoux. Peuvent être imprimées en PLA de la couleur de votre choix. J'ai crée ces perles en m'inspirant des univers polly pocket vintage que j'affectionne et collectionne.
The Temper station replaces the Lid of an Eureka Mignon Mill with a Lid of 120mm x 120mm. It has place for a Temper, Leveler, Brush, blind screen all fitting to a E61 groupset (58mm).
The eau-rdinateur (water-computer in French) is a binary addition calculator that works using water. It uses taped siphons to implement the AND and XOR logic of a half adder. This was heavily inspired by this video:…
Pour la vision lointaine, un pied est bien utile pour assurer la stabilité. @Cet élément permet d'ajouter ou de retirer rapidement une paire de jumelles sur un pied appareil photo, photo. @L'inclinaison permet d'éloigner la poignée de…
editable label - right click on the text and edit the text . étiquette modifiable - faites un clic droit sur le texte et modifiez le texte. infill 5 % no support
Ne cherchez plus chaque chose à sa place
J'ai donc souhaité avoir des connecteurs magnétiques sur le modèle train de Noël icône 10361 qui en était malheureusement dépourvu. J'ai fait un modèle simple, efficace, et rapide à imprimer. L'impression s'effectue avec un remplissage de…
support amovible sans outil pour enrouleur de sangle pour volet roulant. 2 périmètres, 20% de remplissage. base à coller avec un double face de qualité, si besoin on peut les visser , mais il faudra percer les bases.
La pièce d'origine ne plaquait pas sur le sélecteur Finda. (voir photo). Peut-être que mes lames sont trop épaisses? La découpe des filaments trop avancés dans le MMU fonctionnait mal. En supprimant les bossages, les pièces joignent…
Ce modèle est un assemblage de 2 modèles : "PZRacing Start ST500 Laptimer Mounting Bracket for Yamaha R6 RJ27" de Knorrf1x sur Printables "Support d'indicateur de vitesse pour Kawasaki er6n" de Keep3r sur Makerworld Compatible avec :…
17/08/2023 Update: NOW YOU NEED LESS SPACE. I have lowered the inclination of the upper ramps by one degree, resulting in a maximum design height of only 139.089 mm. Hello there! I create this model of can dispenser because i couldn't…
This is the larger version. If you want to print the EURO Coin Sorting Vault on the Prusa Mini (18x18x18), you can find it here . Rocco's Coin Sorting Vault is an absolute eye-catcher! Great design and perfect execution. Since I - and…
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
fidget en forme de coeur a offrir à sa petite ou petit ami
Easy and fast to print in one piece and if you want, also in four pieces without support. The details make it nice to look at. Different versions available if you want to scale or modify it. Intended to be used as a 1:10 scale model but…
When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…
A stand for charging your phone while it's plugged into an outlet. It can be placed on vertical or horizontal outlets. The tray is also reversible. It has small notches on the sides to secure the charging cable if you want to leave the…
The original Scan (Atos Core 3D Scan) made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . I adapted the scan for 3D printing. The mandible is…
1€ shopping cart chip with handle In my profile you can find some other variations of this chip Without writing https://www.prusaprinters.org/prints/9834-1-euro-shopping-cart-chip Without writing and lighter…
If you want a smaller on look at the original: https://www.printables.com/de/model/549833-euro-can-dispenser
European Deer Skull Mount. Designed in Alibre Design 27. PLA+, 30% Infill. Creality Ender 3
This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…
3 tailles de pots design Diamètres intérieurs/intern diameter: 15.2 cm / 20.3 cm / 25.4 cm
Dummy 1 euro coin, for use in shopping carts/trolleys, or other places where you need a plastic copy of a 1 euro coin.
Easy to print Coin organizer. Inspirated by original from store. you can add more strips it is all up on you. you can chose only one or two … there is a lot of variation . Add bridge between two strips to secure them :) If you want you…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
[Update] ---2025/10/25--- ・Changed the support for the head model to brim type. --------------------------------------------------------------------------- This is Flexi Liopleurodon. The body, which is made in reference to spherical…
My PrintInPlace Peterbilt 359 is not suitable for the tight streets of Europe, so here is its short and agile European counterpart! The wheels spin and the engine compartment opens. This model prints all in one go and requires zero…
The Eurofighter Typhoon, representing western Europe among the other fighter kits! F16 Fighting Falcon MiG-29 Fulcrum There are 2 versions of the kit, one with a hanging loop, and the other without. There are also the individual part…
One of the many French lilies. You can use it as jewelry if you print it from resin and make it from metal. Or print in a larger size with fdm, e.g.: as an ornament, etc. Or add another plan. Your choice. =) Update.: The previous version…
Introduction I always wanted to have a flexible transporting system for my gear. Sometimes I take a lot of stuff, at other times only the essentials. Now it is time to present my concept: it is based on “Euroboxes” which are widely…
Simply an small EUR Pallet to fit the 1/10th scale Pallet Jack. (120mm x 80mm x 14,4mm) Prints in two parts and glues together to be able to print without supports. (If you turn the top part upside down) The bottom layer between the…
Coin for the shopping cart (Euro size). Insert and release. Also keychain! Print instructions Just download and print, better with high resolution but it doesn't matter. There is no need for a longer introduction, is as simple as that!…
Euro pallet 1:10 miniature. Print without support.
Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…
This true-to-scale 1:160 European pallet is designed specifically for FDM 3D printing with a small nozzle (0.25 mm). While keeping authentic proportions, the model has been optimized to ensure clean, support-free prints in the provided…
Use the flat_bottom for printing with no support. The other one has the border around the back.
*** UPDATED JUNE 2024 *** Version 2 (squared) is available and is being maintained here. https://makerworld.com/fr/models/374953#profileId-398255 *** UPDATED - March 2024: Japanese and UK version added as suggested in comments/chats. ***…
I couldn't find any free models that I liked of the famous Neuralyzer memory wiping device from the Men In Black film franchise, so I made my own. It's nearly accurate in size and appearance to the on-screen version that does not have the…
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Ticket to ride Europe The board for train and platform In the folder you will find a slim version if the normal version is too wide for your box Printing: Fiberlogy PLA 15% infil 0.2 mm laser high 0.4 mm nozzel printing speed 170mm/s…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…
Thanks for the great design Alex!!! remix from: https://www.thingiverse.com/thing:4618679 I add some springs for tighter fit the euro plug I added V2 with larger springs for easier printing with petg or other materials. usage: Print…
Some where to hold your change. You can clearly identify the coins you want and are easy to pick up. I created a sterling holder sometime ago but never got around to doing the Euro. Sterling Coin Holder link:…
This model of a europallet is modelled in 1:87. The dimentions are after standaard dismentions for a europallet just scaled down. You can scale it slicer if you need it in another model scale. The easiest way to print the model upside…
This is yet another version of a coin sorter for Euro coins. There are coin stacks for the five higher value coins 2€, 1€, 50c, 20c and 10c. In each stack coins are stacked together in groups of five to facilitate counting the value of…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
A simple teaching aid to locate European countries and identify their flags. It is designed for students aged 12 to 15.
Le modèle sans platine s'imprime sans support. Le modèle avec platine s'imprime avec. Je vous conseil de mettre un brim surtout si votre plateau n'adhère pas énormément. Oui sinon commander du Sakolle sur coben.shop Filament GST3D,…
A mount to store your phone charger on the honeycomb storage wall. Also works with bigger chargers like the OnePlus Warp Charge 65, or with other Euro-Plug devices that are not USB-Chargers. Fits CEE 7/16 Alternative II "Europlug" (Type…
Place the containers on the tray in ascending order from 1-7. Put the small change into the top tray. The cents embossed on the bottom fall through the sieve. After inserting the small change, shake a little. Then the tower can be…
Pour Mesurer La Quantité De Spaghetti Avec 4 trous de mesure(mesure jusqu'à quatre portions pour adulte). Réduisez le gaspillage alimentaire.
Hey there! Here's some cool info about the Scout symbol, the fleur-de-lis. Sir Robert Baden-Powell, the founder of Scouts, chose it as the official symbol. It's all about the Scout code: duty to God, others, and yourself. The fleur-de-lis…
Dummy 2 euro coin, for use in shopping carts/trolleys, or other places where you need a plastic copy of a 2 euro coin.
This project contains terrain maps of almost all European countries. Countries not included are either too small or not fully in Europe. Those are: Greenland, Malta, Andorra, Liechtenstein, Monaco, San Marino, Vatican, Russia and some…
If you like my design, you can click to follow 🙂
The dosing cup holder has a recess for a self-adhesive silicone pad to allow a gentle triggering of the switch by pushing on the dosing cup. The diameter and height of the silicone pad are 8 mm and ~2.5 mm. Printed with PLA.
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
Organizer for all available euro coins. (inc. the now obsolete copper ones)
Overview: Upgrade your eurobox with printable hardware. This set includes hinges, snap locking mechanism, feet and handle to enhance usability. There are euroboxes with lid and handle on the market but there are usually more dificult to…
This is a tilted base for the Eureka Mignon Grinder lineup. I only have access to a Eureka Mignon Crono, so can not vouch for the other variations (e.g. Specialita etc.), but as far as I understand, they are all the same dimensions. I was…
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
