1 / 6
E-ink tag insert – put a smart display inside any print (Pingente) — image 1
1 / 6

E-ink tag insert – put a smart display inside any print (Pingente)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The exact socket of a Bluetooth e-ink tag plus its negative: put a tiny smart display inside any model you design.

Rating
0 / 5
Likes
3
Downloads
2
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Put a Bluetooth e-ink tag inside your own design.

This is not a finished object. It is the socket of a Bluetooth e-ink tag, sized to the millimetre and validated in real prints, plus its negative. Subtract the negative from your model in the slicer, add the socket in the same spot, and the tag snaps into your print. It is the same socket that sits inside every Pingente case (hearts, plaques, luggage tags and more), so whatever you build fits exactly like ours.

You need the tag and the free Pingente app. Pingente does not sell hardware: you buy the tag wherever you like (links below), print your part, and the app turns the tag into a tiny screen you change from your phone.

WHAT THE TAG BECOMES

The tag is a small paper-like e-ink display that runs on two CR2450 coin cells and keeps its image with no power. With the Pingente app (Android) it shows weather, countdowns, lists, due dates, your photos, handwritten notes, Wi-Fi and contact QR codes, the Moon, the fact of the day and much more.

  • Free faces, no activation: Note, Wi-Fi QR, Art, Postcard, Motivation, Fact of the day, Verse of the day, Moon and Alert.

  • Every other face unlocks with the tag's permanent activation: US$ 1.99, paid once per tag, no subscription.

  • No account, no password, no cloud.

  • Android now; iOS later.

Get the app: https://play.google.com/store/apps/details?id=app.pingente

More: https://pingente.app

WHAT IS IN THIS MODEL

One folder per tag. Each folder has the socket and its negative:

  • Gicisky 2.1" (black/white/red): socket 74 × 38 × 13.6 mm

  • PANDA 2.13" (black/white/red): socket 74 × 40 × 13.5 mm

  • Gicisky 2.9" (black/white/red/yellow): socket 92 × 46 × 13.85 mm

  • WOLINK 2.9" (black/white/red): socket 94 × 46 × 9.3 mm

The negative is exactly the socket's outer envelope (same size), so the two coincide when they share the same position.

The socket is exactly as thick as the tag, so your part never has to be thicker than the tag itself. The tag goes in and comes out from the front and sits flush with your part; it locks on small ribs inside the socket. The back of the socket is open for the tag's battery box. To change the coin cells, pull the tag out from the front.

HOW TO USE IT IN BAMBU STUDIO OR ORCASLICER

  1. Import your model and select it.

  2. Right-click it → Add negative part → Load → pick the negative of your tag ("… negative.stl").

  3. Move the negative to where the tag should sit. Its front face must be flush with the front face of your part (if your part prints front face down, the front is the face on the bed, Z = 0).

  4. Right-click your model again → Add part → Load → pick the socket of the same tag. Give it exactly the same position and rotation as the negative (type the same numbers in the position and rotation fields). Same size, same place: they coincide.

  5. Make sure the open front of the socket (the side the screen shows through) faces the same way as the front of your part.

  6. Slice with the settings below and check the preview: the opening is cut and the socket fills it.

PrusaSlicer: the same steps, with right-click → Negative volume → Load…, then right-click → Add part → Load….

CAD (Fusion, Onshape, FreeCAD, Tinkercad): subtract the negative from your body, then join the socket in the same place.

Step by step with pictures: https://pingente.app/cases/#modulo

DESIGN RULES

  • Your part must be at least as thick as the tag: 13.6 mm (Gicisky 2.1"), 13.5 mm (PANDA 2.13"), 13.85 mm (Gicisky 2.9"), 9.3 mm (WOLINK 2.9").

  • Keep plastic around the socket. Our own cases keep 2 mm on every side: a 78 × 42 mm area for the Gicisky 2.1", 78 × 44 mm for the PANDA 2.13", 96 × 50 mm for the Gicisky 2.9" and 98 × 50 mm for the WOLINK 2.9".

  • Do not cut through the socket walls. They are smooth on the outside on purpose: the negative is the envelope.

  • Making a fridge magnet? Our cases use two neodymium magnets, 10 × 3 mm, one on each side of the socket, glued into recesses on the back.

PRINT SETTINGS

  • 0.4 mm nozzle, 0.2 mm layers

  • 3 walls, 5 top and 5 bottom layers, 15% infill (grid or gyroid, it does not matter)

  • No supports

  • PLA for indoor parts; PETG or PLA+ for keychains (bags, cars, sun)

Three walls because the plastic between the tag pocket and the edge of a part is thin (about 3.5 mm on our cases): with fewer walls that area prints hollow. Five top and bottom layers because the front is the face people see.

OrcaSlicer and Bambu Studio tip: leave "Top shell thickness" and "Bottom shell thickness" (in mm) at 0, so the layer count above is what counts.

Test the fit first: print only the socket with 2 walls, 10% infill and 3 to 4 top and bottom layers. Do not use 1 wall: the locking ribs bite a fraction of a millimetre, less than one extrusion line, so with a single wall the test print lies.

WHAT TO BUY

The tag (pick the Bluetooth single-tag, app version; base-station versions do not work with the app):

Notice: Pingente does not sell hardware, only the app. The tag comes from an independent manufacturer and you buy it wherever you like. Warranty is the seller's, and checking whether the tag is approved for use in your country is up to the buyer.

Neodymium magnets are dangerous if swallowed: keep magnet parts away from small children and pets.

FAQ

Does it work with other e-ink tags?

Only with the four listed. More tags will be added to this same model, in their own folder, once they are validated in print.

The tag is loose or too tight.

Check that you printed with 3 walls and that a shell thickness in mm is not overriding the layer count. Then print the socket alone as a quick test (settings above).

Can I sell what I make with it?

Yes. The license is CC BY 4.0: print, remix and sell the printed parts, crediting Pingente (pingente.app). Some marketplaces require products to be your own design: this insert is made exactly for that, so you can put the tag inside a design of yours.

Do I need an account or a subscription?

No. The app has no login. Some faces are free; the others need a one-time activation per tag.

iPhone?

Android now; iOS later.

LICENSE

CC BY 4.0. Remix it, sell your prints, credit "Pingente (pingente.app)". Please tag your remix with pingente and link this model as the source, so others can find it.

Ready-made cases (heart, airplane, plaques and more): see the Pingente collection on my profile.

Building in wood? See the WOOD version, the same socket with a flange, friction teeth and a marking template, to press-fit the tag into wood, MDF or OSB: https://www.printables.com/model/1870432

App: https://play.google.com/store/apps/details?id=app.pingente

Site: https://pingente.app · Cases and print guide: https://pingente.app/cases/

Pingente, by Pantekton · pantekton.app

Tags