Counting matching models…
These emoji tokens use special gcode and dont use much filament. Enjoy. A single extruder is used to make an embedded, multi-color design that exists only on one layer of filament. Update: turns out I didn't merge the kiss emoji…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Printed in Bambu PLA Matte - 15% infill - 0.08mm layers with 0.4 nozzle Hardware required: 4x M3 nuts 4x M3 bolts (whatever length required) There is some excess space left after the nut to allow some leeway with the screw length Need to…
This is my version of LilyGo T-Embed Back Shell with power switch. I scraped the switch from some child toy, it looks like SS12D00. The shell uses screws and does not have mounts for magnets. Update 18.02.2026. Added version with 2 holes…
A Bart Dring 6X CNC controller case design I made for my own use. For ease of swapping out the controller, I built the wiring around a 26pin “aviation” connector to be able to just take out one controller box and insert another without…
Designed and 3D printed this sleek two-tier mini bottle display to showcase 50ml liqueur and whiskey samplers in a premium way. The built-in LED light groove enhances each bottle with a clean underglow, creating a modern floating effect…
Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…
This is my version of LilyGo T-Embed Back Shell with power switch. I scraped the switch from some child toy, it looks like SS12D00. The shell uses screws and does not have mounts for magnets. Update 18.02.2026. Added version with 2 holes…
Show of your pens in style while also explicitly who has access to those pens. I wouldn't recommend taking this to work with you unless your coworkers are cool, you hate your coworkers, or if you really like speaking to HR. The holes…
Show of your pens in style—now 200% more HR approval. Looking for a version that's a bit more spicy? Check out my page for a more explicit version. The holes along the top allow you to insert unused filament to add a touch of color or a…
Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into…
Magnetic pistol holder with embedded magnet cavity. Mounts most semiautomatic pistols to a wall, in a safe, under a desk, or in a vehicle. Will also hold steel magazines. Cavity made to fit four standard 60x10x5mm neodymium magnets.…
Simple adapter to mount a Manfrotto tripod pole on a cabinet. See its function here: https://youtube.com/shorts/R8_4c3V0_90?feature=share The locking mechanism uses a TPU insert that acts as a brake pad to grip the tube without scratching…
Designed and 3D printed this sleek two-tier mini bottle display to showcase 50ml liqueur and whiskey samplers in a premium way. The built-in LED light groove enhances each bottle with a clean underglow, creating a modern floating effect…
this is a fully customizable star-knob for embedded m4 square nut
Printing instructions First plate ( Black filament ) Wall loops Layer height Grip 1.STL Grip 2.STL Washer 0.4mm.STL x2 Washer 0.2mm.STL x2 3 3 2 2 0.2 mm 0.2 mm 0.2 mm 0.2 mm Second plate ( Silk silver filament ) Wall loops Layer height…
Made a shelf for the industrial board of AXIOMTEK
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
Nintendo switch game holder, for up to 12 games, with embedded nintendo switch logo eliminating the need of glue. Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the…
PS5 Game holder for up to 10 games. Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the stl, simply color the logo in the desired color with the paint bucket no supports…
PS4 Game holder for up to 10 games. Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the stl, simply color the logo in the desired color with the paint bucket no supports…
PS3 Game holder for up to 10 games. Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the stl, simply color the logo in the desired color with the paint bucket no supports…
Nintendo Switch game holder with embedded logo and pipe Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the stl, simply color the logo in the desired color with the…
The ball Buddy pro model requires a multi-filament printer for the living flex hinge. A fun ball marking tool that allows for interchangeable stencils. Consists of two ball holder halves connected with a flex hinge (requires a flex…
This is a set of Gridfinity battery trays with embedded magnets in the bottom to help align and hold them in place in the grid. Importantly, this set keeps the batteries all at the same height across the different battery heights, making…
This is a TPU printable bump stop that I made for a lid stop for a piece of equipment. This model has an embedded 3/8" nut that you can set a pause on your printer and insert and print over the top. I find 2 perimeters with a 0.6mm nozzle…
I designed this to make the task of getting nuts ready to embed into my 3D prints easier and quicker. I was tired of going to my big tub of fasteners to get a small number of nuts while I was printing. Generally I use M2.5, M3, M4, or M5…
This 3D-printed case, slightly inspired by the Amazon Echo Show, is designed to integrate a Raspberry Pi with a 7-inch display ( link ), offering a compact and clean solution for various projects. The Raspberry Pi is mounted on the back…
About a year ago I made that design when playing with CAD. I needed flush and solid solution for charging my mobile devices. I also needed some switch for my light bar behind monitors. The charger is designed to be mounted in a cable…
1/350 Military Model German Embed Light Cruise full hull model, if you want to print this model, I recommend to print on
When I found this remix of “High Tech Pet - Automatic Dog Door Collar Tag : 1in (25mm) Collar Mount”. I was like, this is just what I'm looking for since the strap mount for the device is what I consider small for our dogs. The designer…
Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…
This was one of those models that are pretty quick to design in CAD and something else entirely to build in real life. I printed the parts on my Prusa Mini so they had to be cut up into quite a few pieces. I used drywall spackle to fill…
To embed the magnets pause the print just before it starts to cover the magnet holes. Add a bit of super glue to each of the holes. Be sure the glue has set enough to prevent the magnets from getting pulled out of the holes when the print…
The Cyberdyne Systems Skynet logo frame, flattened out for a multi-material printer. Assign a material channel/tool to each part. It's already flipped for printing. Print with PLA or PETG, 0.4mm nozzle, 0.2mm layer height is fine.
**This is an EXPERIMENTAL print and may take some tweaking.** Embed Mul-T-Pick Pro lockpicks into 3d-printed handles. I made these essentially the same dimensions as Peterson lockpick handles. -Put a pause print right before the bridging…
After making a few kitchen and general purpose signs with embedded magnets I decided to create a general purpose model. Maybe someone else could use this. The model has a cavity for inserting magnets and the 3MF file includes a pause…
Hi, here's a stand for an Airsoft replica from Double Eagle, My model is M923G in this case. Stand uses the standard hi-cap mag with an adapter. The idea was to make it simple and flat so can be easily transported to the site. Simple…
This small modification just embeds magnets in an already good design. This will decrease your holder's strength of attachment to the wall but removes the danger of pulling out the magnets if they are improperly glued into the model. If…
https://cult-of-the-lamb.fandom.com/wiki/Knucklebones Base Game Print This is the included 3D Print. It's print-and-place so that you can do it all in one go. Dice You'll need a total of 17 normal-sized D6 dice.
A Coffee filter holder size 4 with embedded 10mm (i used round ones but the pockets are square) magnets. Print upright and add pauses at the end of the magnet pockets to insert the magnets during the print.
This Star of David has an internal space to embed a magnet while printing. It's a practical decoration for the holidays or any other time of the year, and the magnet won't ever fall out. Design features The model is about 43 mm point to…
As in title. You'll need 10x3mm round neodymium magnets(number specified in file name). Remember to set a pause in slicer to put in magnets. Also - slightly adjusted tolerances, should be easier to use.
There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…
Remixed several times. Great design. If you need different sizes, you can adapt the solid-works (2025) file easily… or ask me in case you don't have Solid-Works :-) Assembly → Self explanatory Brillenetui_Innen.SLDPRT → help file to…
I love JamesThePrinter's model. It helps to keep my fingers busy with just a small and easy print. I wanted to get rid of the need to glue anything. So I changed the slider so that the magnet is embedded as well. I made it so that you can…
Hardwares One 4 * 4 mm cylindrical magnet. I used N52 grade ones. Assembly Press the magnet into the hole of the pusher. Apply some glue if it's too loose. Replace the original parts with these modified parts, the assembly process is…
Geometric shapes, around 20mm per side (actual edge size - 21.215mm) using 5mm magnetic balls. Make various polyhedron for education, or fidgeting. 2025-01-13 - Added Golden Ratio Rhombus model WARNING: Magnets can be very dangerous,…
This is a knob (diameter 15mm) where you can embed an embedment nut M4x6x6.
Remix of PLA Filament Box with embedded lettering for PLA, and other types of filaments. Changed the font and lettering so that the wording is flush with the box top. Filament for Dual, Tri, Galaxy Box Top: Prusa Galaxy Green PLA with…
3d printed crochet hook holder compatible with crochet set: https://www.muziker.com/alma-hooks-ch054 Alma CH054 Crochet Set 14 cm the two sides are held together using magnets, the connection is not that strong, so i reccomend using a…
LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…
Just updated the chess piece models to be built wih a solid base and an embeded magnet. They are sized to be 1.25" at the base as well. For my chess board, I updated the bases to have a small relief on the bottom to allow some room to sit…
This script will allow you to use the Command Line on your computer + OpenScad to generate HUGE amounts of any OpenScad file (Labels, Personalized Designs, etc) using a simple CSV. How To Use It: Populate the CSV File with everything you…
NOTE: This is only a remixed bottom piece of the 59 HP Monster Standee Base. It is specifically a modification of the V12 variant, though it might or might not work with older variants. The remaining pieces that need to be print may be…
I printed this to prank some of my friends when visiting, and leaving behind these on some places. Wanted to try embedding magnets and worked. Easy to do with the bambu slicer. Make sure to pause the print just before the whole is closed…
This heart has an internal space to embed a magnet while printing. It's a practical decoration for Valentine's day or any other time of the year, and the magnet won't ever fall out. Design features The model is 42 mm wide, which should…
Magnet sizes are 8x3, 10x3, 12x3 ( also added one 15x5, so its more “universal” but its not tested yet ) To insert the magnets, print with a 0.15 layerheight then set "change filament" >>>layer 25<<< ( 3.80mm ) For the 15x5 at >>>layer…
This mouse themed model has an internal space to embed a magnet while printing. It's a practical decoration for kids who love searching for hidden Mickeys. The magnet won't ever fall out, and it's strong enough to hold things up by…
I built on @bensonk's model by using larger, embedded magnets. I also increased the height in order to increase the size of the contact patch with the skis/boards. Finally, I added a lip on the center nub to hook around boards. The…
Yes I know there are lots of fidget spinners out there; this was a test of how to embed parts - bearings and nuts (M10?) - into a 3D printed object. Laying down filament on top of the embedded parts didn't work especially well, so the…
This cloud has an internal space to embed a magnet while printing. It's a great practical decoration, and the magnet won't ever fall out. Design features The model is 50 mm wide, which should pass the small parts test for children under 3…
A modified pusher for Demolisher to make it able to use my Tandem Magazine. Hardwares One 4 * 4 cylindrical magnet. I used N52 grade ones. Screws from the blaster. Glue Printing Files are pre-oriented. I use 5 walls on all parts and the…
Adapters for Straight and Angled Talon Magazines. Hot swappable and doesn't need to trim the reinforcing ribs in the magwell. Requires a modified pusher to work with it. Check this collection for more detail. After inserting it, pull the…
This is a fake-bolt geocache , with room for a magnet to be embedded! The printer will seal the magnet in place. Four sizes are included, and six magnet sizes as well. All magnets are listed as [diameter] x [thickness]. Some sizes require…
I'm using Walksnail's GPS, but it should work with any 18mm sized GPS, beware of the cable connector space, of course. It fits tight with mine, so I don't need to double-side tape it or something, but yours might be different. The…
This paw print has an internal space to embed a magnet while printing. It's a practical decoration that's inherently safer than many magnets you can purchase, since this one won't ever fall out. Design features The model is large enough…
Hello i made this replacement for my Screen, from my Stereo brand Joyin i hope it works for you like me. i print it whit PETG, but i think ABS works fine too, and maybe PLA. kind regards
To cool down my RaspPi with Octoprint I use this Heatsink + Fan . Works fine so far, but after a half year the fan got louder then the rest of the whole printer environment. From another not finished project I had the 40x40 Noctua Fan on…
You'll need 3x - 8mmx3mm neodymium magnets. If printing at .2mm layer height, pause at layer 18 to install the magnets. Here's the ones I used: Amazon.com: FINDMAG 50 Pcs Fridge Magnets, Small Magnets, 8x3mm Neodymium Magnets,…
My dog is very active on outdoor adventures, in-and-out of water constantly, and kept breaking the commercial AirTag holders I used for his collar, several times a year. This design is intended to be more durable and secure than any on…
I provided each letter individually as an .stl, and also the .3mf file with the entire alphabet fit onto a single plate AND a pause at the right location for inserting the magnets. Check with your printer and settings to make sure the…
This is a simple window cover meant to be printed with an embedded net. The embedding is quiet simple, first add a pause around half way through the print in your slicer. It doesn't have to be precise, as long as there are a few layers…
By adding a “pause print” at the level before the internal cavity is covered, you can embed magnets into this print, (as can be seen in various other designs). Then, when they slide on to the laces of a hoodie, or any string/rope/lace…
A simple pen holder to attach to any metal surface. Uses two 8x3mm magnets. No glue needed.
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
I have modified the model to hide the magnets. It looks much better. But it is VERY IMPORTANT! You'll have to set the slicer to STOP THE PRINT at the top of magnets, before the first layer, that covers the magnets. Here is a tutorial…
The original model from Jerry's Random Stuff didn't quite fit in the stryfe, so I made some adjustments so that they'd work. You'll still need the original lever pin, pusher head, and pusher pin from the original model. You'll also need…
A super simple design to help you clean up your desk! It helps you declutter your desk by organising your pens into one place. I had modelled it perfectly to fit under my monitor on my stand as that was some wasted space which I could…
Purchased off Amazon, April 2025, this display is a 2560x720, 21:9, USB-C (or Micro-HDMI) display requiring 20W power. I made it to explore integration opportunities for my other cyberdeck projects. I am not affiliated with Wisecoco, and…
This is a hex screwdriver holder for the GridFnity storage system. It uses embedded 6x2mm magnets to attach to base plate. This is the base plate i use it with : https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate…
Required hardware: 4x 6x2mm magnet This is the base plate i use it with : https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate Instructions: You must add a pause instruction at layer 13. When the printer pauses,…
This is a PrintDry vacuum holder for the GridFinity storage system. It fits in a 1x2 GridFinity unit but the footprint of the receptacle is deeper than one unit. This was meant to be used with single row base plates such as this one . It…
This is a Bambu Lab glue stick holder for the GridFinity storage system. It uses embedded 6x2mm magnets to attach to base plate. Required hardware: 4x 6x2mm magnet This is the base plate i use it with :…
This is a small spray bottle holder for the Gridfinity storage system. It will fit a bottle up to 35mm(1.375in) wide such as this one on Amazon. It uses embedded 6x2mm magnets to attach to base plate. This is the base plate i use it with…
Description: The MagnoStrip Duo is a purpose-designed LED strip holder tailored for makers, hobbyists, and professionals seeking a clean and efficient way to install LED lighting inside enclosed or metallic environments such as 3D printer…
I have installed an NRF24 module in my Lilygo T-Embed, so I created a back cover to accommodate two external antennas for 2.4GHz and 433MHz. Also it can be used if you like to install two external antennas to improve signal coverage. It…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
A printable treadmill key with an embedded magnet (see below) that allows you to power your treadmill without using a wristband key. Requires a 20mm x 5.1mm (0.78" x 0.2") magnet (for example: https://a.co/d/apZZkp2 ). Works with any…
Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.
Another iteration on already stellar designs, just some small tweaks to embed the 6x2mm round magnets into the print with a pause at layer 17 to place the magnets when printing.
TPU case for the LilyGO T Embed & T Embed CC1101 since I couldn't find one! I suggest using TPU 95A or softer for the case if you have antennas/SMA connectors, since they do take some effort to put on. Otherwise, there shouldn't be too…
Three 6mmx1.5mm holes to each foot pad and a pause in printing. Add magnets to improve the stability. No glue needed
My vision of 18650 extension for t-embed. Print with supports. You will need: Battery connectors 7x2 mm round magnets - 4 pcs wire with connector or just cut original battery wire m2 screw 10 mm - 2 pts. But I think you can use that comes…
Simple case for t-embed and 18650 extension version Can stuck near usb-c - just push it little bit from usb-c side Print with supports
Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
Expanded the base to fit 6x3mm magnets , to do so I had to reduce the bin size . Everything fits nicely and there is no collision with the bed or the nozzle wiper. Thanks @meagerfindings for the original remix
A modification of the CMF-Phone-2 Case to have a Simple phone stand on the go
