1 / 2

Core One +/Gen 2 Ikea 10.6l (11qt) Drybox Printer Hat

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Auspicious

@Auspicious

Store you Ikea 365 10.6l (11qt) filament feeding drybox ontop of your printer to keep it out of the way.

Rating: 0 / 5
Likes: 0
Downloads: 0
Makes: 0
Views: 55
Reviews: 0

Updated at source: Oct 15, 2026

Model information

Source: Printables
Category: Accessories
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (11)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (2)

Core One +/Gen 2 Ikea Drybox Printer Hat

No where to store your filament feeding drybox after you put your Core One onto a stand? Take advantage of the top of the printer to keep the side profiles slim and allows easy moving of your printer.

Hardware

x4, M3x12 screws

Installation

Remove 4 screws on the top of the printer that hold the top metal sheets together. These are accessible with the plexiglass lid installed on top of the printer!

Ensure proper positioning and fit of your 4 frame pieces.
The frame pieces don't have to be glued together, unless their fit is loose.
Combine the frame pieces and screw them onto the top of the printer using 4, M3x12 screws
Ensure proper fit and positioning of the Container Support (right) and Container Support (left).
Glue the Container Support pieces together with super glue.
The Container Support does not have to be glued onto the frame pieces, unless their fit is loose.
Install the container support onto the frame pieces.
If you aren't installing a front tray, you are done!

Ensure proper fit of Front Tray (right) and Front Tray (left)
Glue the front tray together.
The front tray does not have to be glued onto the frame, unless their fit is lose.
Done! Happy Printing!

Files to Print

Container Support (right)
Container Support (left)
Right Back Frame
Left Back Frame
Right Front Frame (Standard) OR Right Front Frame (WITH TRAY INSERTS)
Left Front Frame (Standard) OR Left Front Frame (WITH TRAY INSERTS)
If you choose standard for 5 & 6, you are done.
Front Tray (right)
Front Tray (left)

Print Settings

0.20mm layer height
2 perimeters (You can do more, prints just take longer)
15% grid infill
Supports are needed. Printed correctly supports are minimized. View the 3mf files.

Other Hardware Used

Jon's, from Proper Printing, Core One stand. https://properprinting.pro/products/legs-for-prusa-core-one-l
Gridfinity baseplates that total to 2x7. I used x1: 2x5 and x2: 1x2
Containers & Other Parts in Photos