KitchenAid Zester Mixer Accessory
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Description: A zesting accessory for the KitchenAid brand of food mixers for people who cook fancy stuff.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Description:
An accessory for the KitchenAid brand of food mixers for people who cook fancy stuff that needs lemon or lime zest. The 'zest attachment' fits into the nose-piece drive and is secured with the standard thumb screw. The lemon or lime is pushed onto the three tines BEFORE starting the motor. Works best at an intermediate speed setting. Most standard zest scrapers will work with this accessory.
CAUTION!! The tines are sharp and will draw blood if contacting the skin; ask me how I know! Since uploading this model I've created and uploaded a container to store it safely. Check it out.
Material:
Polymaker PETG
Printing Notes:
This is an engineered product. The printer must be set up and configured to produce dimensionally accurate parts.
Components print well with bed only supports.
Print the drive shaft on its flat surface.
Print the quill vertically, nose down. Optionally, use a single layer brim to support it.
Assembly Notes:
Install the bearings on to the drive shaft before fitting the quill.
Refer to the cross-section drawing for the assembly order.
After Use Care:
Do NOT immerse in water! Wipe the tines with a damp paper towel and set aside to dry.
Parts List:
3x Stainless Steel Tines, 2"x2.5mm (nails) ... Amazon seller Etauwe
2x Bearings, sealed, 6701-2RS, 12x18x4 ... Amazon seller Uxcell
6x Heatset inserts M2.5x4x3.5 ... Amazon, seller Pofsnnx
1x Steel Dowel, 3mmx12mm ... McMaster-Carr P/N:91595A112
6x Stainless Steel Screw, M2.5x0.45x12 ... McMaster-Carr P/N:90258A121