1U BNC antenna mount for LGX fiber patch panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An LGX plate with 2 BNC connector holes for mounting wireless mic antennas on a 1U rack fiber patch panel.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I needed to mount my wireless mic antennas outside of my rack case, so I designed this plate with 2 BNC connector holes. It fits a 1U blank fiber patch panel that holds 3 LGX plates. This is the panel I used: https://www.amazon.com/dp/B0C49HJ79H
The holes have a flat side, so the BNC connectors can't turn.
I use it with a Phenyx Pro PTU-7000 receiver, but it works with any receiver that uses BNC antennas. In the photos, 2 plates hold 4 antennas.
What you need (per plate)
2 x BNC cables. These are the ones I used (I used 4 of the 50 cm ones): https://www.aliexpress.us/item/3256803246181553.html
2 x M5 x 14 mm screws
2 x M5 lock nuts
Need a 2U version? See my 2U BNC antenna mount: https://www.printables.com/model/1873161-2u-bnc-antenna-mount
Print settings
Material: PETG
4 walls (perimeters)
4 top layers
4 bottom layers
25% infill