1U BNC antenna mount for LGX fiber patch panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An LGX plate with 2 BNC connector holes for mounting wireless mic antennas on a 1U rack fiber patch panel.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to mount my wireless mic antennas outside of my rack case, so I designed this plate with 2 BNC connector holes. It fits a 1U blank fiber patch panel that holds 3 LGX plates. This is the panel I used: https://www.amazon.com/dp/B0C49HJ79H
The holes have a flat side, so the BNC connectors can't turn.
I use it with a Phenyx Pro PTU-7000 receiver, but it works with any receiver that uses BNC antennas. In the photos, 2 plates hold 4 antennas.
What you need (per plate)
2 x BNC cables. These are the ones I used (I used 4 of the 50 cm ones): https://www.aliexpress.us/item/3256803246181553.html
2 x M5 x 14 mm screws
2 x M5 lock nuts
Need a 2U version? See my 2U BNC antenna mount: https://www.printables.com/model/1873161-2u-bnc-antenna-mount
Print settings
Material: PETG
4 walls (perimeters)
4 top layers
4 bottom layers
25% infill