Honor Magic8 Lite / Honor X9d slim case (PLA, snap-in)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim snap-in PLA back case for Honor Magic8 Lite (same body as Honor X9d). Prints flat, no supports. STL + STEP.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Slim back case for the Honor Magic8 Lite. The Honor X9d has the same body (161.9 x 76.1 x 7.8 mm, same camera island and button layout), so it fits that one too.
Designed for rigid filament (PLA / PETG): the phone snaps in from the front over a 0.8 mm retaining lip with a 45 deg inner chamfer. Side walls 1.6 mm, back 1.6 mm, rim stands 1 mm proud of the screen, rounded back edge. Clearance to the phone is 0.15 mm per side for a snug fit.
Cutouts: round camera opening (57.5 mm, 1.25 mm clearance around the 55 mm ring), one open slot on the right for volume + power keys (nothing under the keys, cut flush with the phone edge), bottom opening for SIM tray + USB-C + speaker, top opening for speaker + mic.
Dimensions were taken from the official orthographic renders of the phone and the fit was tuned on a real Magic8 Lite. Files: STL for printing and STEP (solid B-rep) if you want to tweak clearance, cutouts or add your own details in CAD.
Print settings (Bambu Studio / PrusaSlicer): 0.2 mm layers, 0.4 nozzle, 4 perimeters (walls are solid), 5 top/bottom layers, no supports, no brim needed on textured PEI. The STL is already oriented: back on the bed, opening up. Elephant foot compensation 0.15 mm helps the back edge. Keep cooling on and minimum layer time around 8 s so the thin lip does not warp.