1 / 1
Arduino VENTUNO Q — 10" 3U Rack Mount with Integrated LED Light Guides — image 1

Arduino VENTUNO Q — 10" 3U Rack Mount with Integrated LED Light Guides

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This version brings the board’s status LEDs to the front panel through integrated light-guide channels

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
219
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

This version brings the board’s status LEDs to the front panel through integrated light-guide channels, keeps the cooling assembly exposed, and provides a clear window over the LED matrix.

The photos show the printed rack installation.

Features

  • 254 × 132.4 mm front panel for a 10" rack, occupying 3U.

  • Six rack mounting holes.

  • Integrated light-guide channels for the board’s status LEDs.

  • Recessed acrylic window with four screw-mounted retaining clips.

  • A small access hole on the right allows the board’s side button to be reached using a thin rod or suitable screwdriver.

  • Two versions: with the enclosure integrated, or without the enclosure walls -> then you need to cut a little part (22mm/15mm) of your original case to let the 4 LED diffusers pass.

Included files

  • Ventuno_3U embeded LED.stl — front panel with integrated enclosure and LED light-guide channels.

  • Ventuno_3U without case.stl — alternative front panel without the enclosure walls, retaining the light-guide features.

  • window block.stl — acrylic retaining clip. Print four.

Choose one of the two main panel versions.

Acrylic window

The window pocket measures 43 × 63 mm, with a visible opening of 39 × 59 mm.

Recommended starting cut size: 42.5 × 62.5 mm, providing 0.25 mm clearance on each side. Check the fit in your printed part and sand the edges if needed.

My intended acrylic thickness is 3 mm. Four clips screw onto the rear of the panel to retain the window. The retaining arrangement accommodates different acrylic thicknesses, using suitable screw lengths and ensuring the clips securely overlap the acrylic.

Tighten gently to avoid stressing the acrylic or printed parts.

Recommended LED diffuser method

Print the panel with its front face flat against the build plate.

Use transparent filament for the first layer, then change to the enclosure colour immediately above the thin membranes closing the LED openings. These transparent areas form flush front diffusers, with the light-guide channels ending behind them.

Check the membrane thickness against your slicing settings: the colour change must occur above the membrane, not through it. Inspect the sliced preview to make sure the LED windows remain entirely transparent.

Use the same material type for both colours — for example, transparent PETG followed by coloured PETG. Transparent PETG is what I use.

For a manual filament change, schedule it at the required layer height. Check that your slicer does not continue using transparent material throughout all the bottom shell layers.

Alternative LED method

If printing a transparent first layer is not possible, carefully open the thin membranes at the front ends of the LED channels and fit clear filament into the channels.

I use 1.75 mm transparent PETG filament as a light guide. Secure it without applying pressure to the LEDs or the board.

The integrated transparent-layer method is my preferred option: it gives a cleaner, flush finish and avoids separately securing the visible filament ends.

Assembly notes

  • Check the sliced orientation and preview before printing.

  • Install the acrylic from the rear and retain it with four window clips.

  • Keep the cooling opening unobstructed.

  • Select fastener lengths to suit your printed parts and acrylic thickness.

  • The original rear cover is not included. On my assembly, several underside components contacted that cover, so it required additional clearance openings. Check this before tightening an original rear cover onto the board.

Tags