205 models
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…
Things were getting a bit hot behind my home-lab rack, so I figured additional cooling was needed. I slammed together the geometry of 3 of @KennyVerhoeve_588554 's blanking plates in order to get the requisite size, made some holes to…
I've also designed an 8-drive version that uses a backplane. This drive rack holds seven standard SATA drives in a way that they are hot-swapable. It takes up 3U on a 10" mini rack (I used the GeeekPi one). The main body takes a while to…
UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Collection of 10 inch blank Panel with Voronoi Pattern 1-3U These Models have a finer pattern than my first model with the Voronoi pattern Print as you like, these models are not for structural integrity.
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…
This is brackets for mounting rack mounting network equipment on a shelf. It is designed for 3U height, so can take 3 1U devices. I included the Fusion 360 design files for easy remixing.
##English## Here is my almost completely printable 10 inch rack from 3U-5U. All parts fit for the P1/X1 Bambu printers, 6U would not fit anymore - and here I would go for a finished rack for stability. PLA or PETG works, the example with…
Rack mount for 3 Intel NUCs into a 10 inch rack. It consumes 3 height units and can hold 3 Intel NUC. Slide ins are availabe for: - NUC 10 tall - NUC 10 small - NUC 13 tall Should be printed in PETG. Additonal parts needed M3 screws and…
Description I had a 24" monitor sitting idle and, as it happens, a 42U server rack at home. (Yes, not exactly standard apartment furniture, but here we are.) The idea struck: hang the monitor inside the server rack. This design came to…
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
Fits on Prusa Mini Nozzle: 0.4mm Material: PLA, anyone works Print: 0.2mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Gyroid (This is important in gridfinity pieces with magnet holes)
2U (3U) Raspberry Pi mount for 19" rack A rack mount for up to 12 Raspberry Pis. 2U if the Raspberry Pis are powered via the GPIO pins. 3U if powered via USB (Due to the cables sticking out). Heavily inspired from this design , but…
Test model included to check fitting, just make sure you print whole bracket on same orientation and setting as test print. Final print should have supports enabled. You will need two M5 screws to secure bracket to rails. If you need to…
Honeycomb Storage Wall in a 3U panel for 10" inch network/server rack.
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
I currently do not own any 1U modules but I would like to get the most out of my Intellijel 4U Palette case so I created the 3U to 1U Adapter for Intellijel. This adapter converts regular 3U eurorack modules to Intellijel’s 1U module spec…
Elevate your router for better signal and stability. Single screw fitting. Should be comparable with most screw sizes, use washer to ensure a secure fit. Designed for Asus RT-AX53U router however should fit any router with 84mm - 85mm…
Printable rack ears with #10-32 tapped holes for 1U, 2U, 3U and 4U sizes to mount rack gear together outside of an enclosure. Also includes files for 1U, 2U and 3U with a leg to lift up the front of the piece of gear. I have a lot of…
For link the 2 parts use a hot gun is more easy
A simple 1x2x3U Gridfinity Bic lighter bin. this holds the lighter in a flat position. This was designed to be used in a storage box. The bin sits snug around the lighter so it doesn't move to much during transport.
EURORACK Blank Panel │3U – From 2 to 20 HP │ "Circuit Chaos" Best to print with a 0.4mm nozzle, layer height 0.2mm or smaller. The “circuit chaos” is made of 0.5 and 1mm pipes so technically it is possible to do 2 colour changes, I think…
Designed to fit the Lab Rax or any 10" serverrack with 240mm depth: https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u?from=search#profileId-1325352 Parts: M6x10mm button head screws M6 brass inserts (8mm OD, 4mm length)…
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…
I liked the 3u fan panel that @jackknrsh7_319691 created, but I wanted to make it with clean straight lines to match the rest of my printed panels.
Please comment, rate, and post a make! Be sure to check out my other models! I have my Bambu X1Cs on this 46" adjustable height Husky workbench which has a weirdly shallow top drawer. I modeled these bins along with this base to fit into…
When empty, another 1x1 or 2x1 Gridfinity entity can be stacked on top.
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
I wanted to mount an ITX board with two PCIe cards in my 10" rack, but wasn't able to find anything that allowed this specifically. Using heron's excellent model as a base I adapted it to suit this purpose. Using a PCIe extension cable…
This is addon for my 3D printed Galaxy Cluster rack. 3D Printed Galaxy Rack: https://www.printables.com/model/1173672-10-mini-rack-all-3d-print Print settings: 0.28 PETG
I'm making the jump from my intellijel palette to a conventional 3U eurorack case, but still had a few 1U modules I wanted to use. This model can accept threaded inserts, or square nuts, and ranges from 6HP to 40HP (actual width consumed…
Macro lens holder for thermal camera Hti HT-203U ZnSe 20mm diameter Focal lenght 50,8mm Focus distance 5cm PETG
Gridfinity 3x1x3u bin with dividers for 5x 100mm (~4") bits with press fit magnet holes (PFM) This design fits 5x 100mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
Large (4x) Rack Frame for 2U (3U) Raspberry Pi mount for 19" rack This is just a larger rack frame for the original model by @ichwillkeinenacc. The larger rack frame is very handy to store network switches, power supplies and other stuff…
Welcome to the Kit Card Tree Library with the 3UDC pivot mount and information on how to build a display for your kit card or anything else you opt to attach. This project uses parts from several different projects. You will print the…
Gridfinity Battery bin, can store 12 AAA and 6 AA Batteries! Switch colour at Layer 104 if you want to colour code Created with kennetek's awesome openSCAD remodel https://github.com/kennetek/gridfinity-rebuilt-openscad Gridfinity by Zack…
The back of my 10" racks are notoriously messy. I built these to be installed facing inward from the back and help keep the cables tidy.
Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own. Prints vertically, and can fit small printers. My bed is 220x220x250 (K1 SE). As you install the MS-01 it is a tight fit as I didn't want it to…
3U rack rail for Ikea Lack table. Intended to be used with M5 nuts (press fitted to the backside) and M5 bolts for mounting.
Here's a lot of news versions of the Raspberry Pi Rack. 2U - For Modules 2 or 3 blocks 3U - For Starlink Router 3U - For Modules 4U - For Lacie HardDrive A lot of Tray You can combine it like you want (2U whith 1U, 4U whith 1U, 3U whith…
I wanted to push more air into my SuperMicro 836 server. I modeled this so I can have 3x140mm fans pushing air inwards, through the HDD-drive cages. It is a push fit onto the case, and is kept in place by the side screw of the case it…
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
Super low-profile latch, intended for boxes with >= 3u bottoms. Print it with a brim. No supports needed. The mesh is a bit scuffed, but it prints fine.
3U Frame Three simple U's which are interlocked can form an interesting puzzle cage. The challenge is to accommodates four hexacubes forming a 3x3x3 cube where the holes are not visible. Beware for this level 15 puzzle with only two…
A 3u blank panel for your 10 inch homelab. Voronoi Pattern I have created also a model with a denser pattern and in the dimensions in 1U 2U & 3U, just see my other models.
When moving some Eurorack gear into a 19" server style rack, I noticed the 84hp frames that were supposed to fit left ~4hp in wasted space on the sides. So I bought some 104hp Synthrotek rails and cut them down to 17 ⅝" (88hp) to give…
3U cage for 6x SATA 3.5" hdd mounted vertically using sleds (dell style) for a 10" rack. I've designed the bay's for this model of sled ( https://www.amazon.se/dp/B07929WYSR?ref=ppx_yo2ov_dt_b_fed_asin_title ). You will probably have to…
I know it fits the tall NUC 8th generation, and I'm pretty sure that works with all tall models of the same general design. The remixed files are the “Slide In NUC Rack” files - the other STLs are mseidler's original creations that I'm…
Gridfinity 2x1x3u bin with dividers for 5x 65mm (~2.5") bits with press fit magnet holes (PFM) This design fits 5x 65mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
A 3x Atomizer / Vape Stand 1x2x3U for Gridfinity
5U and 4U takes just the single piece. The 3 U requires 2 triangular shaped pieces on either side of the rectangle.
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1x1x3u Gridfinity Universal Holder for ¼ in Socket Wrench * Any/All ¼ Inch Drive Sockets should fit so…
This is a standard 1U 2U 3U 4U spacer for your rackmount hardware. Additionally there is a dedicated Silverstone RM44 enclosure spacer made specifically for this model. I have thrown also a DXF template file for you to make this thing of…
Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…
I Introduce to you the Microsoft Surface Gridfinity pen case. The case fits snugly around you're pen so it doesn't wobble around. I'ts secured in place with 2 6x2 magnets placed where the magnets inside the pen are. So the pen doesn't…
Tried to find a 3u spacebar model to modify my Darmoshark SK16 macropad and couldn't find any, so I modeled and printed this myself. Might fit other keyboards that need a 3u spacebar too, but I don't have one on hand to test. Printed on a…
Макро лінза для тепловізора HT-203U-i Macro lens for thermal camera HT-203U-i Lens - https://www.aliexpress.com/item/1005004054521261.html P/N:CNFL02D20F50 China PVD Focusing Lens Size:20mmDia*2.2mmET Focal length:50.8mm Coating:AR/AR @…
https://www.thingiverse.com/thing:4441076 presented a gardena tool. No supports needed. Tested print on resin printer. should also work on PLA... Print Settings Rafts: Yes Supports: Yes Resolution: 200 Infill: 20 Filament: Elegoo Resin…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
Reduces height of the front to only take up 1U of space (45mm). From there it gradually expands to the original height (52mm). For this reason, whatever you place below it in your rack should have at least 10 mm of headroom to account for…
This remix allows you to utilize 2.5" SSDs in the 8 bay setup by RagingRoosevelt. With this, you only need 3 M3 x 6mm screws to secure each drive, which shouldn't be an issue for SSDs. Holes are large enough to allow LTT screwdriver to…
This is a remix that splits the body of the 3U 8 bay hard driver holder allowing to be printed on smaller build plates i printed this on a Bambulab a1 mini just fine the model does need supports for the two halves but support is minimal.…
Parts list: 2 x M3x12mm screw 2 x M3 threaded insert LED-strip (I used these: https://www.aliexpress.com/item/32476317187.html?spm=a2g0o.order_list.order_list_main.269.b6e918020R6Yfx ) Diffuser sheet (I used these:…
This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…
I made a simple panel for mounting a 7-inch screen on my Rackmate T2 case, at least it can hold my screen now. There will be minor modifications later, hope everyone likes it. Change Logs: V2.0 adding FPC slot, adding more space for…
50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by assembling the modules with threaded strips. Free STL file downloads for other modules available under…
Created this Gridfinity 5x1 (3U tall) holder for the Pine64 Pinecil Soldering Iron , plus 2x flux and a tube of wire.
This is a blank tile for Eurorack, 3U 1Hp
I expanded the 2u keycap to around 3u, along with the necessary adjustments to the stabilizers and choc pins, so it would fit in the Chosfox L75 3u spacebar slots. Printed at .1mm on a .25mm nozzle on my Prusa Mini and it slots into the…
A simple correction/remix to Natalie T's fantastic 10" server rack. 3U side panel was not blank, but the same 3U for mounting a 120mm fan, thus this quick remix.
A stackable Gridfinity holder in 4x2 size (3U height). Holds my wire cutters (sorry not sure the brand). It's a bit thin at the bottom of the holding part but works fine.
3UDC refers to the profile of the display clip and socket system. Anything with 3UDC should fit together. In this system tolerances are built into the socket so that you can expect anything people design to fit. The 3UDC clips have 4…
Reworked the 3U side panel with 120mm for Natalie T 10" server rack. Plain ribs, more holes + plain panel
This is a blank tile for Eurorack, 3U 2Hp
Welcome to the Developers library for the 3UDC clip system and the 156DTmm display tree. Both of these systems involves lots of components and I wanted to put parts and information needed to create things in a non-end user library. These…
2.3U 19 inch rack front panel mount for 12.6" 1920x515 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005001966967133.html (with touch) Print the two halves of the front panel mount / two clamps on the…
This wall mount is for a Fanvil X3U VOIP phone. Designed using a base model that was designed by Kyle Campbell. Worked off that model to make the slanted back and hole for Ethernet wire. I found that the best way to print this is to place…
blank 3u plate for 10 inch rack to build your own models off of. its designed to fit inside the core one build plate
This is a 2/3U height Ventilation Panel for 10" Rack Category: Electronics
Created a simple carrying/travel case for my Soocas X3U toothbrush body + 1 brush.
Right and left parts to set up a video data monitor on the table.
This is an implementation of a eurorack enclosure using things from the hardware store. It's the base for my raspberry pi eurorack system. I've made no provisions for power though there are options in the group I'm going to create and…
This is a replacement phone stand for a Fanvil X3U phone. This stand may also work on similar Fanvil models. If you do try it on a different model please let me know if it works or doesn't and I can update the description. It is modeled…
BOM: Printed Parts: 1x Panel Right 1x Panel Left 2x Controller Bracket 1x Junction Box Base (Optional) 1x Junction Box Lid (Optional) 8x TPU Vibration Dampener 2x Hex-Fan-Cover-120mm (Optional) Electric Parts: 2x 120mm x 25mm fan 2x 3V…
If you have a Super Micro 3U case, SC836 or similar, you can destroy the existing metal fan wall and insert this to have 2 120mm fans instead of the stock fans. Useful if you have a want to fit a 120mm or 240mm radiator into the case, or…
Needed a longer, short bin for some M5 x 90mm bolts, but as such a non-magnet gridfinity bin does not exist yet…
I added a Multiboard grid to the inside of the 3u side panel, seems like it might be useful but have not actually tested it yet, just starting to build my mini rack. I have also done some back plates with Multiboard on the outside for the…
4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 4.3U apart. Print the two halves of the front panel…
A Gridfinity bin designed to store and organize watch caseback press dies. Accommodates 12 dies in total: 16mm wide slots: 18/20mm, 21/23mm, 24/26mm, 28/30mm, 31/32mm, 33/34mm, 36/38mm, 40/42mm, 44/46mm, and 48/50mm. 11mm wide slots: 1x…
10" mini rack mount for Tenda TEG1005D, about ⅓U tall to accomodate the hight of the switch. Routing hole for power or other cables. It has screw holes to replace the factory front screws with M3 6mm and firmly mount to the plate.
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
Matching case for: https://mikrotik.com/product/l23ugsr_5haxd2haxd The FreeCAD file is included to allow easy modifications. It includes the step file found on the Mikrotik Homepage. To build this, you need: 1x…
not perfect but it seems to help
Tested with an Arctic 120mm fan - should work for other standard fans as well. Find the source here
Modular 3U Trays for 3,5HDD Tray Caddy Screew Sata connector at the back Rack Disk on Amazon Rack Disk on Ali Express Sata Connectors
