1 / 2
Gridfinity 1x1 Key Fob Holder – VW Golf 8 / ID.3 / Škoda Octavia 4 / SEAT Leon — image 1
1 / 2

Gridfinity 1x1 Key Fob Holder – VW Golf 8 / ID.3 / Škoda Octavia 4 / SEAT Leon

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Gridfinity 1x1 bin that holds the VW Group keyless fob upright, rotated 45° for sturdy walls. With or without magnets.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
132
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

About

A Gridfinity 1x1 bin that holds the current VW Group 3-button keyless key fob – the newer fob without the flip-out key blade. The key stands upright, so it takes a single grid cell and is easy to grab.

It fits the fob used in the VW Golf 8, ID.3, ID.4 and ID.5, Škoda Octavia 4 and Enyaq, SEAT Leon 4, Ateca and Tarraco (2020+) and Cupra Leon and Formentor. It is not meant for the older flip key (Golf 7, Octavia 3). If your key looks the same, it will most likely fit – print the fit test first.

Design idea

The fob is about 40 mm wide, which is too much for a straight pocket in a 1x1 bin: it would leave a wall of only about 0.35 mm. Rotating the pocket by 45° uses the diagonal of the cell and leaves walls of about 2.5 mm, so the bin stays sturdy and still fits the standard grid.

Features

  • Gridfinity 1x1, height 5U: 41.5 × 41.5 × 35 mm, no stacking lip

  • Pocket 40.8 × 15.8 mm, 28 mm deep, rotated 45°

  • About 40 mm of the key sticks out for an easy grip

  • 0.6 mm lead-in chamfer on the pocket edge

  • Two versions: without magnets, or with holes for standard 6 × 2 mm Gridfinity magnets

  • 4 mm fit test slice with the same pocket

Files

  • vw_skoda_key_fob_gridfinity_1x1.stl – without magnets

  • vw_skoda_key_fob_gridfinity_1x1_magnets.stl – with magnet holes

  • vw_skoda_key_fob_gridfinity_1x1_fit_test.stl – optional, quick fit check

Print settings

  • Orientation: as provided, base on the bed

  • Supports: none

  • Nozzle 0.4 mm, layer height 0.2 mm

  • Walls: 3

  • Infill: 10 % gyroid

  • Top / bottom layers: 5 / 4

  • Brim: not needed

  • Material: PLA or PETG

Tips

  • Print the fit test first (a few minutes). The key should slide in freely without wobbling.

  • Magnet version: press the magnets in after printing. Add a drop of glue if they are loose.

Not affiliated with Volkswagen, Škoda, SEAT or Cupra.

Tags