IKEA Tertial Wall Mount, Screw-On, Reinforced
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for the IKEA TERTIAL work lamp. Screws to the wall. Reinforced to take the full leverage of the lamp.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for the IKEA TERTIAL work lamp. Screws directly to the wall.
The mount is reinforced so it can take the full leverage of the lamp arm. It extends downward and braces against the wall. A 5° forward tilt makes it easier to stow the lamp.
Dimensions:
Distance Mounting point of the Lamp to wall: 33 mm
Tilt: 5° forward
Mounting holes: 3x, 4.5 mm diameter
Print Settings
Printer: Prusa CORE One L
Material: PETG, PETG CF or ASA CF recommended
Profile: 0.15 mm Balanced
Perimeters: 5
Top / bottom layers: 6 / 6
Infill: 25 %, adaptive cubic
Supports: Yes, required
Hardware:
3x screws (4 mm)
Wall anchors matching your wall