TPU Seals, Hose Gaskets & Grommets + Gasket Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU gasket organizer: box with 7 sorting bins + 94 printable seals – hose gaskets, rings, grommets and feet.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
A box with 7 removable bins and 94 printable TPU seals: hose gaskets, tap washers, rings, grommets and feet. Every bin has 6 compartments with raised size labels. The lid has an engraved title.
Seal types
HOSE GASKET – BSP 1/4", 3/8", 1/2", 3/4", 1" + 3/4" with strainer mesh (washing machine hose) · 2 / 3 mm
TAP WASHER – Ø10–22 mm, with or without screw hole
SQUARE RING – O-ring replacement, ID 4–16 mm, section 1.5 / 2 / 3 mm
SEALING WASHER – M3–M10, 1.0 / 1.5 / 2.0 mm
ANTI-VIBRATION – shoulder grommet M2.5–M8 for 1.5 / 3 mm panels (fans, motors, pumps)
CABLE GROMMET – panel holes Ø6–20 mm, open or with a pierceable membrane
BUMPER FOOT – Ø8–25 mm, dome or screw-on
Printing
- Seals: TPU 95A, 100 % infill, slight over-extrusion (about 105 %), slow speed – this makes them watertight.
Box, bins and lid: PLA or PETG, 0.2 mm, 15 % infill, no supports. The lid prints face-down, and a text inlay is included for two colours.
Optional colour labels on the bins: add M600 at 1.2 mm and 24.0 mm.
Good to know
Great for garden hoses, shower hoses, drains, splash-proof enclosures, cable pass-throughs and anti-vibration mounts. Don't use them on pressurised mains water, hot water, gas, fuel, or anything in contact with drinking water.
Designed & built by Ing. TULák
GitHub: https://github.com/davidvancl
Printed it? Share a Make! Questions or ideas? Drop them in the comments.
Thanks for printing – may your fittings never drip again!