ZX4R Customizable Tank Grips and Fuel Tank 3D scan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tank grips for my ZX-4R made using 3D scan data.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This should hopefully be the final in my customizable grip series for this bike. Maybe some winter accessories next? You can find the thigh grips and knee grips at the links below.
I have included, as usual:
2 blank models that you can texturize using bumpmesh.com, There is one small one and one larger one. Chose whichever one you like.
The original scan used to create the object. (You can use this to create your own custom blank model with whatever profile you want.
3 Textured models (knurling, noise and Labyrinth). All models were displaced 2.5mm and the border smoothed 1mm
Making A Custom Grip Texture:
To make a custom knee grip, download the blank and go to bumpmesh.com .
Upload the model into the website. You can also run the program locally from GitHub.
Orient the model upright by rotating it or placing it on a desired face as shown below.


Select the texture pattern that you like,
Adjust the texture smoothing to your preference; invert for knurling texture or if you just want to.
Set texture height/thickness to 2.5 mm. You will have to mess around with this value to get your desired results.
UV scaling to adjust the size (I prefer 40 for most textures).
Set masking to "Include" only and "Fill".
Set the masking max angle to 20 and then click on the middle of the grip area.
Smooth mask distance to 1 mm. Set to linear.
Export the final model (0.2- 0.3 mm resolution recommended)(1.5-2 million polygons).
Print the grip texture preferably in TPU. You could also use 3M 468MP Adhesive Sheets, provided you clean the surface well and print in ABS
Making A Custom Blank:
This requires some knowledge of Blender.
Open the scan .ply in Blender and navigate to the sculpt tab.

Set the matcap to the studio lighting matcap as shown. This will show you the countour lines of the fuel tank.

Use the faceset tools, particularly the lasso and poly line tools with stroke stabilization enabled to get the general outline of the grip you want.

You will have multiple facesetst like this. Press H on the ones you dont need. This will hide the ones you dont want.

Press facesets from visible. This will merge the all of the visibly facesets into one faceset.

Press ALT H to undo the hiding. Smooth the edges of the faceset by using the draw faceset brush and holding SHIFT.

Extact the mesh. Turn off the solidify modifier that is automatically added.

OPTIONAL: Cleanup the curves and edges using the delete brush (with dyntopo enable) and the grab brush
Go to edit mode (press tab), select all (press A) and manifold extude the extracted mesh by 0.5-0.8mm.

Disclaimer:
All models were made by me and not by AI. Not for commercial use. All renders and cleanup were done in Blender.
The scans were conducted in 0.4-0.5mm point density which is a lower resolution than usual as I had to scan with my laptop. It should be good enough. The right side was scanned and then mirrored to get the result for the left side.
The blank meshes as 0.8mm thick. You can lower this value to like 0.5-0.6, but I set to 0.8mm to be safe. Just - extrude one side of the mesh in Blender.
My other ZX-4R scans can also be found in this collection.
