CYM Case NM-CYD-C5 – RockBase NM-CYD-C5 (ESP32-C5, 2.8" Touch) Case (battery + GPS)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D-printable, two-part enclosure houses a **RockBase NM-CYD-C5** board
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you like my design and plan to download it, please show your appreciation by giving it a like!!
SUMMARY / DESCRIPTION
This 3D-printable, two-part enclosure houses a RockBase NM-CYD-C5 board (ESP32-C5 with a 2.8" resistive touch screen) for the Cheap Yellow Monster (CYM) firmware — https://github.com/JimGat/CYM (select the board as NM-CYD-C5 in the Web Flasher). It turns the bare board into a pocket device with its own battery, charging and GPS.
What fits inside
- The NM-CYD-C5 main board, held by 4 × M3 × 7 screws from the front into the brass hex standoffs that come with the board's kit
- A 1100 mAh LiPo battery (3.7 V, 1.25 mm plug, up to 53 × 30.5 × 7.5 mm)
- A Youmile LX-LCBST charge + 5 V boost module (USB-C charging)
- An ATGM336H GPS module with its antenna
- An SS12D00G slide switch (3 mm lever) and the screen stylus
Features
- Two parts: a lower case and a front frame that wraps the screen and sits flush with it
- Flexible BOOT and RESET buttons on the back face
- Roofed pocket for the GPS antenna and a routed channel for its 90 mm cable
- Pockets for the battery, charge module and GPS module; a pocket for the slide switch (O / I)
- A full-length channel for the stylus
- 1.5 mm holes for the RGB LED, the two charge LEDs and the GPS LED
- Engraved port labels: USB-C UART, USB-C, P5, SD, CN1, P1, SPK, CHG, and O / I
- The CHG (charge) port is charging-only and carries no data — see the manual
Printing
- Two parts, printed flat, no supports
- Case 88.9 × 52.9 × 15.8 mm; front frame 88.9 × 52.9 × 3.5 mm; combined thickness 19.3 mm
- About 20 g of PLA; roughly 2 h 25 min for both parts together
- Full slicer settings are in the Print Settings below
Assembly
Full illustrated instructions are in the attached manual (EN / TR / DE, PDF): general information (board specifications, pinout, parts list), 3D printing, assembly and flashing the firmware with the CYM Web Flasher. It covers the wiring (GPS → P5, battery → charge module, module 5 V output → switch → board S3/S1), setting the module output to 5.0 V before assembly, and changing the on-board charge-current resistor to 2 kΩ (≈580 mA) to suit the 1100 mAh battery.
License: CC BY-NC-ND 4.0 — you may print and use the case yourself and share the unmodified files with credit. Selling printed cases or the files, commercial use and publishing modified files are not allowed without permission. The CYM firmware is a separate project with its own license.
CYM Case NM-CYD-C5 · Revision 2 · Designed and made by @birolt29 @alen29
PRINT SETTINGS
- Printer brand: Creality
- Printer: Ender-3 S1 Pro
- Rafts: No
- Supports: No
- Resolution: 0.16 mm
- Infill: 15%
- Filament brand / color / material: SUNLU / Black / PLA (PLA+)
- Notes:
0.4 mm nozzle. 3 walls (Arachne / variable line width), outer wall first, outer-wall speed 30 mm/s. Nozzle 210 °C (first layer) / 205 °C, bed 60 / 55 °C. Flow ≈0.95. Elephant-foot compensation 0.1 mm. No supports anywhere. Case: flat closed back face on the plate, open side up. Front frame: back face (toward the board) on the plate, lettering up. Dry the filament before printing so small lettering does not fill in. PLA+ is enough; use PETG only if the device will sit in a hot environment.