UNO Junior Paw Patrol Card Box – Multicolour Inlaid Lid (MMU3), No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snug box for the UNO Junior Paw Patrol deck, with a three-colour inlaid lid. Two parts, no supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A snug storage box for the UNO Junior Paw Patrol card game, made for my daughter. The lid carries the UNO logo and a Paw Patrol badge in three colours, printed with the Prusa MMU3.
Features
Friction-fit lid that slides over an 8 mm lip, 0.2 mm clearance per side
Finger notches on both long sides, to grab the deck even when only a few cards are left
Holds up to 60 cards (56 × 87 mm)
Outside: 64.8 × 95.8 × 23.5 mm when closed
Two parts, about 36 cm³ of PLA in total
Print settings
PLA, 0.2 mm layers, 0.4 mm nozzle, no supports
Lid: print face down. The logos are inlaid 0.6 mm into the top, so colour changes only happen on the first three layers and the top comes out smooth.
couvercle.3mf is a single multi-part object with filaments already assigned: grey = 1, red = 2, white = 3. Reassign the parts in PrusaSlicer if your slots differ.
Separate STLs for the lid (grey, red, white) are included if you prefer to assemble the parts yourself
Base: print open side up, in one colour (red in the pictures)
Please note
Card size is assumed to be the standard UNO size (56 × 87 mm). Mattel doesn't publish the exact dimensions, so measure one of your cards before printing. The model is parametric (Python script) and easy to adjust.
Not printed yet: photos of the real print will follow.
Fan-made design for personal use. UNO is a trademark of Mattel and Paw Patrol is a trademark of Spin Master; this model is not affiliated with or endorsed by either company.
Designed with AI assistance (parametric Python script).
En français
Boîte de rangement pour le jeu UNO Junior Pat' Patrouille, avec un couvercle trois couleurs (logo UNO et écusson) imprimé avec la MMU3. Le couvercle s'emboîte sur une lèvre de 8 mm et tient par friction ; deux encoches permettent d'attraper les cartes. Couvercle imprimé face contre le plateau : le décor est incrusté sur 0,6 mm, les changements de couleur se font sur les trois premières couches. Le 3MF affecte déjà les filaments (gris 1, rouge 2, blanc 3). Cartes supposées au format UNO standard (56 × 87 mm) : mesurez-en une avant d'imprimer. Création de fan pour un usage personnel, sans lien avec Mattel ni Spin Master.