1 / 3
Drawer Front Spacer Clip – 3 mm Gap for 18 & 19 mm Boards — image 1
1 / 3

Drawer Front Spacer Clip – 3 mm Gap for 18 & 19 mm Boards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Push-on clips for even 3 mm gaps between kitchen drawer fronts. Versions for 18 mm and 19 mm boards.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Simple push-on spacer clips for installing kitchen drawer fronts with a perfectly even 3 mm gap.

HOW TO USE

1. Push a clip onto each top corner of the lower drawer front – the closed end wall stops against the side edge, so every clip sits exactly at the corner.

2. Rest the next drawer front on top of the clips. The 3 mm shelf sets the gap.

3. Fix the front (screws / adjusters), then pull the clips off and reuse them.

VERSIONS

- 18 mm – for 18 mm boards (slot 18.3 mm)

- 19 mm – for 19 mm boards (slot 19.3 mm)

FEATURES

- Exact 3 mm gap shelf

- Closed end wall = corner stop

- +0.3 mm slot clearance so the clip slides off easily after fixing the front

- Lead-in chamfers on the slot openings

- Grip grooves and engraved size on both sides

- 4 mm hole to keep a set together on a string or keyring

PRINT SETTINGS

- Material: PLA

- Layer height: 0.16–0.2 mm

- Walls: 4 (or 100% infill for the strongest clip)

- Supports: none – print as exported, closed wall flat on the bed

- Brim: not needed

- Elephant foot compensation: 0.15 mm recommended for accurate slots

- Print at least 4 clips (one per corner)

- Print time: about 25–35 min per clip

FIT TIP

Real "18 mm" boards are often 18.2–18.5 mm. If the clip is too tight on your boards, scale the model 101–102% in X only, or use the 19 mm version on thick 18 mm boards.

Tags