Pocket Cyberdeck Clamshell for iPhone 12 mini and a Mini Bluetooth Keyboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged pocket cyberdeck: a mini Bluetooth keyboard in the base, an iPhone 12 mini in a lid that stays open at 112°.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tiny laptop made from an iPhone 12 mini and a Torima M7 mini Bluetooth keyboard. The keyboard sits in the base, the phone in the lid. Closed it's 138 × 81 × 24.5 mm.
Two lids fit the same base:
lid.stl: the phone drops in and MagSafe holds it. Needs a MagSafe ring sticker.
slide-in_lid.stl: the phone slides in and a latch holds it. No sticker.
You need
iPhone 12 mini
Torima M7 mini Bluetooth keyboard (133 × 68 mm)
2 × M3×20 screws, they're the hinge pins
A MagSafe ring sticker, about 56 mm, for lid.stl
Printing
PLA, 0.2 mm layers, 3 walls, 20% infill, no brim.
base.stl: no supports, ~1 h, 32 g
lid.stl: supports under the hinge knuckles, ~1 h, 35 g
slide-in_lid.stl: supports under the hinge knuckles, ~1 h 20 min, 37 g
Assembly
Stick the ring sticker into the round recess, press the keyboard into the base, set the lid on the base and screw the two M3s in from the sides.
Help wanted
The hinge is the weak spot: nothing keeps the lid closed, and the opening angle depends a lot on print accuracy. If you know hinges, ideas and PRs are very welcome on GitHub.
I've printed earlier versions of this; the current lids haven't been printed yet.
Slate version: https://www.printables.com/model/1898026
3D viewer: https://cyberdeck.cobanov.dev
Source, FreeCAD scripts you can change for other devices: https://github.com/cobanov/cyberdeck
The terminal app on the phone: https://deckterm.cobanov.dev