Counting matching models…
For the “Last Meters” contest i thought it would be fitting to print something that not only uses a little of plastic, but also something that is actually good for the environment. If personally hate using floss and instead use…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
I'm happy too release number 3 in this series of the Bad Batch characters. A big thankyou to Dmetriev whom modeled the original Pepakura PDO for which I converted this to the best of my abilities in what I think is a very presentable 3D…
Designed to hold the standard 12mm cylindrical laser crosshair module you find on site such as Amazon or AliExpress. Requires that you replace the stock 5mm M3 Flat Head Socket Cap Screw (FHSCS) with an 8mm or 10mm one. The laser is a…
Simple golf ball marker. design is crosshairs.
As previously stated, it is just a little case for the SSH1106 OLED. Uses 4 M3 nuts and bolts to hold it together and provides quite a bit of protection. (they might be m2 thinking about it…) just print it with the face down if you want…
It's the sword from the kazuha's quest.
I'm very glad to present you the Tiny Grasshopper, a flexible Print in Place Model Video This little friend is printable without using Support Structures. I also printed it with 80% size and the Result is great. Prints great with PLA.…
Parametric design (OpenSCAD) added! This calibration tutorial is also described here ! The model works with the Customizer panel of OpenSCAD , a free 3D CAD modelling software for creating solid 3D CAD models, which is very powerful for…
Print it exactly the same as you would the original. Crosshair flat on the bed and no supports. PLA is fine.
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
Geometric grasshopper with elongated polygonal legs in a minimalist pose.
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal with bands and rivets for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a…
This allows you to mount a light to the Ruger MK IV SSH edition. Will fit other models but I would only run it on barrels under 4.5ish inches. Has a small hole in the back to add a zip tie for extra rigidity. Definitely not needed, but…
Press down on it's tail and let your finger slip off to make it jump forward. It jumps up to 2 meters forward. Print on its side. Stronger walls recommended.
Mit meinem unkomplizierten Modell kannst du schnell und einfach die benötigte Ringgröße ermitteln. Innendurchmesser (mm) Umfang (mm) Größe (USA/Kanada) Größe (GB) Größe (Frankreich) Größe (Japan) 15,9 50 5.3 (5) K 10 9,7 16,2 51 5.7 (5-)…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.
print flat side down. Will only fit the SSH version of the MK IV. If anyone has the distance of the holes of the regular MK IV and want to let me know I could modify it to fit that.
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
The cheshire collimation eyepiece by fortinmike works quite well, but for a noob like me, a crosshair in the eyepiece would have been nice as well. Since I did not want to reprint an eyepiece, I just modeled a crosshair that fits on the…
As a special request to Nicole Davis https://www.thingiverse.com/daviscosplays/about Here is the chest armour to go with the helmet. As for the canisters on the back. I wouldnt waste fillament attempting to print those when you could…
A 3D printed CNC Plasma Laser Guide for my Duramax machine torch. I'm using 9mm diameter lasers like this: https://www.amazon.com/gp/product/B00ARBPI5Y/ Designed for lasers that throw a 45 degree line/beam. Should be placed roughly 6…
This mount is to add a slim laser crosshair for the Creality Falcon 2 22/40w laser engraver/cutter. Many available laser mounts use large crosshairs and are thus heavily braced on the tool head. Instead I found a small diameter crosshair…
The Helm of the Isshurument. From the graphic novel 'Deverish Also' This is a wearable design with a pivoting visor. I designed it to fit my lager than average head, so you will probably want to scale the files down a bit to better fir…
Printing Information: Use tree support to support the voronoi structure (both antennas need to be supported) Use a brim to improve the contact surface with the printbed
Trophy of the great asshole can be printed in several colors depending on the layer of each element which are different
When you're sitting stoned at the computer... I don't know why, but I made a pipe for my 14mm bong glass heads. Normally I would throw the design in the garbage can now... but in fancy filament and fuzzy skin it doesn't look bad at all...…
This universal laser crosshair holder can be mounted on the laser unit of the Elegoo Phecda (or other laser engravers) to provide a laser crosshair on the workbench. It mounts a crosshair laser (~5$ on Amazon) with a coin cell holder (~1$…
Hook for rails inside of a glasshouse . Just put the hook in a rail and twist it. Print it in 0.15 layer height, 100% infill and with supports underneath and in the hook to the top. Haken für die Schienen innen im Gewächshaus. Den Haken…
Simple grip design with my crosshatch pattern on it. Mounts with mLok. “brim” variant has built in support for printing.
This mount is to add a 12mm laser crosshair for the Creality Falcon 2 22/40w laser engraver/cutter. I removed the original cable from the laser module by opening the module. I took the cheapest USB-C cable and cut it to about 10 cm, the…
Print without supports! Interested in selling prints of this model? You can obtain a commercial license by joining my Patreon under the Commercial License tier!
a Jumping Grasshoper whery easy print!!! no support needed!!! standart printing will work great!! For great jump use PTGE!!!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
This is a set of 2.2 dish wheels that I designed for use on the Tamiya Hornet, Grasshopper, and Frog. I print them at 100% infill and 0.1 layers. Category: 3D Printing
This video not only shows how these laser crosshairs are installed and work on my DIY plasma rig, but also details how I designed these holders from scratch — from start to finish using SketchUp (free 2017 version, the last free version…
A robust, sleek and easy way to add an additional laser pointer to your Creality Falcon2 laser so it is easier to position over your workpiece, ensuring it starts wherever you have the laser set to, helping to maximize material usage. It…
Rear blace for TAMIYA SUPER HORNET & GRASSHOPPER2 Installation video. https://www.youtube.com/watch?v=cLVxrM2hq1s&t=3s
When I purchased the AVX scope I was unable to get a crosshair to suit, so I made one. I've shot it extensively and it's held up OK. Printed with eSun PLA+ I chose orange as it was the best colour for contrast against the field and…
this is a helmet from star wars the clone wars season 7 tv show. the size of this helmet hasn't been adjusted to fit anyone's head, but it might be wearable if sized correctly not much has changed compared to the original aside for being…
I've tested it in both PETG and Woodfill PLA, it's best to start by printing 1 leg section and 1 pin to test the fit. Pins should slide in easily and allow the leg piece to spin freely. If it is not working, try adjusting the extrusion…
Designed to hold the standard 12mm cylindrical laser crosshair module you find on sites such as Amazon or eBay. Requires that you replace the stock 5mm M3 Countersunk Socket Cap Screw with an 8mm or 10mm one. The laser is a tight friction…
remake of the original battery cover of the tamiya grasshopper/ hornet,...
I designed this attractive indoor planter for my wife from a description she gave me.
Replacement for FIAMMA No. 98673S204 + 98673A205 Settings: - PETG - 70% infill, Gyroid
This is a mount for a 12mm cross pattern laser to mount to the Creality Falcon 2 40 Watt laser module. It uses the USB C port on the laser head to power the laser module. The bracket mounts to the front two screws holes of the laser head.…
This is a mount for the Creality Falcon 2 40W Laser Cutter to add a Laser Crosshair. I just wanted something sturdy and didn't move when I touched it and thought I might share :) First ever upload, hope it works well for you guys (and…
Voron 2.4r2 center rear skirt piece that has two hexagon holes with Parametric Umbilical Gland (PUG) passthrough ports.
when you wanna shush someone but be kinda silly about it prints fine with no supports; the ring is ~size 6, designed to sit at the top of your pointer finger, but there's a gap and it's thin enough that you could dunk it in some hot water…
A model you can set up underneath your kitchen cabinets to secure wine or other types of spirit glasses. This model holds 4 glasses with a bottom plate diameter of 70 mm and a thickness of 3 mm. Feel free to modify it to your needs :)…
Customized version of https://www.thingiverse.com/thing:2280529 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2280529 Instructions Using the following options: widthSquare = 210 wallThickness = 0.8…
this is a helmet from star wars the clone wars season 7 tv show. the size of this helmet hasn't been adjusted to fit anyone's head, but it might be wearable if sized correctly Category: Props
Prevents the holster from holding brass. Easy print.
I originally designed this model in Blender for my bow tie loving husband. Since then, I have printed it frequently and in many color combinations. On the back of the bowtie, there is a slot where you can fit it over the top button of a…
Solid-Spool-Holder for 20X0 profile (hanging version) Easy printable, very simple and solid spool holder with bearing inserts to mount on top of any printer made with 2020/2040 profiles. Requires: Bearings M5 screws T-slot nuts
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it. I was able to print this without…
Here's a set of 2.2 wheels for the Tamiya Grasshopper 2/II. You have to use the old 5 pin style drive hub found in the kit or print a set of them from here: https://www.thingiverse.com/thing:4159329 These are the same as my wheels for the…
I bought some cheap cast metal bossheads online, the first time I used one it broke, I was about to chuck it away when I thought I could still make use of the screws on it. So I went about designing a 3D printable one, but ended up using…
Crosshairs is an abstract strategy game for 2 players. It is relatively easy to learn and has unique mechanics, making it one of my favorite games. Rules: See attached .pdf file. Print: Green Planes (x5) Orange Planes (x5) Blue Altitude…
I used two of https://www.amazon.com/gp/product/B083SJD418/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 to make “crosshairs” for my K40. To align, use a test fire create a dot, then just rotate the lasers until the cross at the dot.
Mit meiner Radienlehre hast du jede Rundung vin 1 bis 12mm Radius im Griff. Auch praktisch als Schlüsselanhänger für unterwegs geeignet und immer griffbereit.Mit meiner Radienlehre hast du jede Rundung vin 1 bis 12mm Radius im Griff. Auch…
Customized version of https://www.thingiverse.com/thing:2280529 If you want to get instructions howto manage bed calibration click here: http://www.cazda.com/en_US/3d-printer-bed-center-calibration/ Instructions Using the following…
even without screws, it holds on pretty well :) you can add a piece of acrylic to the front to give it a more professional look
To fit the shell i trimmed down the point of the chassi to the level of the bumper mounts and notched the bottom of the front of the beetle shell maybe 3mm. The files for this are the front+rear mounts, they attach to the chassi using…
Please leave a ♥ Like if this print was helpful to you :-) This is a "clamp-on" design chain holder for the Ninebot G30D escooter and a max chain width of 3 cm. Holds the lock securely in place when not needed and also makes locking it on…
Gedruckt mit 3 Wand - 3 Oben unten Layer und 100% infill. Keine Unterstützung nötig Gerne Konstruktive Anregungen oder Ideen zum Verbessern des Things!
Have fun with this low poly grasshopper! Check out my profile for more low poly animals.
Please leave a ♥ Like if this print was helpful to you :-) This is a "clamp-on" design chain holder for the Ninebot F2 Pro/Plus/… (D) escooter and has a max chain width of 3 cm. Holds the lock securely in place when not needed and also…
A simple pure pipe for 14.4 mm glass bowls. I have kept it plain and simple, as enjoyment is the main focus. But I myself also find this simple design quite appealing. Enjoy Note to the rather overdone stoners: This pipe should not be…
ataud base para colocar los posa vasos (no probados, no impreso) pero segun mi experiencia deberian encajar perfecto
Creality Falcon 2 40W Laser Crosshair Bracket Should fit all the Falcon models. Used this as inspiration:…
Fully customizable cross hairs for your scope. There are two different kinds. One with a ring in the center and one with a dot. You can change every parameter for example the amount of rings, the outer ring diameter, the inner circle, the…
I repurposed the excellent truggy wall hanger from @Qrome to fit my old Tamiya Grasshopper. Printed in PETG w/ 3 perimeters and 20% gyroid infill. Two (2) #4 screws are required
Solid-Spool-Holder for 20X0 profile (lying version) Easy printable, very simple and solid spool holder with bearing assisted rolls to mount on top of any printer made with 2020/2040 profiles. Requires: Bearings M5 screws T-slot nuts
Eat croutons while ratting in comfort. An adaptor that converts Opsmen Earmor headsets to use elastics instead of a headband, in a way that aesthetically and functionally resembles the GSSh-01 retention system. Makes it easier to wear…
The Meowser by Old Fusion Designs is a great blaster, and the DL-44 is an even better cosmetics kit for it. But the scope on the blaster I had made for me by a fellow local Nerfer had a big omission-it was solid. I thought it would be a…
Made this after seeing Steve Makes Everything video https://www.youtube.com/watch?v=UeF0NW0m1Y8 as I was having issues centering on rough edged slate. Printed with Sunlu PLA+. It's a tight fit on the laser head; minor tolerance on the…
For those who may be using Rhino and possibly Grasshopper for modeling, here is a boomerang that is made in Rhino and Grasshopper. Design-wise, it is pretty similar to my Yet Another Vee design. In terms of construction, it is basically…
This is a grasshopper leg that has been extracted from a micro CT scan.
This is my OctopusShip for ship to ship combat. This model was made for a fellow Patron of MZ4250 Thingiverse Printables who requested it on the discord server that is available for every Patreon tier. An original model for with I used…
Here's a 3D printed version of the Universal Orlando Annual Passholder (UOAP) logo! This model features places for 10x2mm magnets ( https://amzn.to/49YAl1K ) that can be glued into place. Print Recommendations Material - PLA Layer Height…
Exclusively for Russian-speakers. Try to print with tree supports. Prusa prefered (but you can try Cura with custom-made supports and support-blocking zones).
Ich glaube, dass es schon allen mal passiert ist: Du wolltest Spaghettis kochen und hast entweder zu viele oder zu wenige Nudeln gekocht. Jetzt ist schluss damit, mit meinem Gadget portionierst du jetzt präziese zwischen 1 und 4 Portionen.
Print settings: material: PETG 0,25 layer Prusament JetBlack
Crosshair game was developed and Designed by Stephen Tavener, Artist Néstor Romeral Andrés, Stephen Tavener Publisher's website https://nestorgames.com Directions of how to play can be found on the same site as the design inspiration on…
Grasshopper definition to make basic gridfinity units. Test it and see if it works for you! 3dm and GH file are in the zipped folder.
This is an enclosure I've built for my electric boat. It houses the electronics to read out the state of charge, cell voltage and temperature of my battery packs. A STM32 uses ethernet to interface with a battery management system via…
Die Halter sind für Stecknüsse ( 3/8", 1/4", 1/2", 3/4" ) geeignet, die Halter werden auf eine DIN35 Hutschiene aufgeschoben. Es sind auch Wandhalterungen 90° und 70° dabei. Zur Befestigung der Wandhalterung mit der Hutschiene sind noch…
Tamiya Spot Light for Hornet Frog Grasshopper Hotshot Falcon in order to replace the original one.
For 16mm drill press that column size around 74mm. What you need: 2 x 12mm laser pointer red line type ( model name: SYD1230 ) 1 x 6mm 2 pins toggle switch 1 x USB cable any length 2 x M5 12mm bolts or shorter 6 x M3 6mm screw 1 x 5 cm of…
If you have never tried to film small, very fast moving objects at some distance with with a zoom lens camera, you will probably not understand why this cross-hair viewfinder is a very valuable addition to your camera. A perfect…
eine kleine Anzeichenhilfe für Pica Dry Stifte mit 6mm Durchmesser
Selfmade holder for Vitavia Glasshouse latches to connect gardena watering hose to wall and/or roof. No tools needed. just twist and it is fixed. The clip holds the hose. Open with push to side.
Scaled to 144th Gundam hands.
Came across a 1951 or so Elna “Grasshopper” sewing machine, the rubber feet from 70 years ago were unsurprisingly as hard as rock. Once the original is pried out the new should just push on. You can change the walls and infill on TPU to…
