1 / 3
52 mm and 60 mm Gauge Pod Fit Test Set – Tolerance Rings + Single-DIN Sample — image 1
1 / 3

52 mm and 60 mm Gauge Pod Fit Test Set – Tolerance Rings + Single-DIN Sample

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Check after about 1.5 hours of printing whether your printer hits 52 or 60 mm gauge and 1-DIN dimensions.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
4
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial

Three test rings for 52 mm or 60 mm gauges, a single-DIN sample and an M3 test block. Know after about 1.5 hours of printing whether printer and material fit.

Before you spend hours printing a pod or panel: this set shows after about 1.5 hours of printing (60 mm variant a little over 1.5 hours) whether your printer and filament hit our dimensions.

  • Three rings for the gauge housing, as a 52 mm or 60 mm variant, with +0.2 / +0.4 / +0.6 mm clearance (1, 2 or 3 notches). Our models use +0.4 mm. If another ring fits better, you know how to scale.

  • A 6 mm tall single-DIN sample with crush ribs: push it into the slot and feel whether it clamps.

  • An M3 test block: drive in a set screw and check that the thread holds.

  • Everything hangs on thin bars and is snapped off after printing.

Print in the same material as the final part (PETG, ASA or ABS): ASA shrinks more than PETG.

Variants (all included)

  • Rings for 52 mm housings

  • Rings for 60 mm housings

Gauge bore: 52.79 mm (52 mm gauges, +0.4 mm clearance).

Included

  • STL, 3MF and STEP for every variant

  • 52 mm tolerance test ring – print it first

  • README with print settings and installation (EN/DE)

Safety

For testing only, not for installation in the car.

Fit

Shows whether +0.4 mm fits; otherwise scale the model accordingly.

FAQ

Which rings should I print, 52 or 60 mm? It depends on the gauge housing, not on the front ring. Measure the housing diameter behind the ring: about 52 mm → 52 mm variant, about 60 mm → 60 mm variant. The front ring is often larger: a Defi 52, for example, has a 58.3 mm ring but a 52 mm housing. Which ring matches your models? Our models bore +0.4 mm, i.e. 52.8 or 60.4 mm: that is the middle ring with two notches.

How it's made

Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes. Renders are made from the CAD in Blender.

License

Free under CC BY-NC 4.0: share and remix with attribution, no commercial use. Not an original part, no affiliation with any vehicle manufacturer.


Deutsch: Drei Testringe für 52-mm- oder 60-mm-Instrumente, eine 1-DIN-Probe und ein M3-Testklotz. Nach rund 1,5 Stunden Druckzeit wissen, ob Drucker und Material passen.

Print settings

  • Material: PETG (or ASA, ABS). No PLA – it softens in a hot car.

  • Layer height 0.2 mm, 4 walls, 20 % infill, no supports.

  • Orientation: Flat on the bed, as the file is laid out.

  • Print time approx. 1 h 32 min, about 19 g (default variant).

  • Print the 52 mm tolerance test ring first to check the gauge fit on your printer.

Installation

  1. Snap the parts off the bars and deburr.

  2. Push the gauge into the three rings; the one that fits without force and without wobble shows your clearance.

  3. Push the DIN sample into the slot and drive the M3 screw into the block.

Tags