1 / 7
Christmas Gift Box Ornament | Holds a Real Gift Card & Cash | Sliding Lid — image 1
1 / 7

Christmas Gift Box Ornament | Holds a Real Gift Card & Cash | Sliding Lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wrapped present for your tree that is also the gift. Slide the lid open and find cash or a gift card inside. Two parts

Rating
0 / 5
Likes
3
Downloads
7
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Most money-holder ornaments are small balls that only take a rolled-up note. This one is a flat gift box with a real inner cavity of 90 x 60 mm, so a standard gift card lies flat and folded banknotes (up to a €50) fit with room to spare. The lid slides in on a printed dovetail track, and because the hanging ear is at the opening end, gravity keeps the lid shut while it hangs on the tree.

The lid is a full gift: gold ribbon, a big bow, a little gift tag (write a name on it with a paint pen) and a holly sprig with berries. Gold ribbon bands also wrap around the box itself. Designed by ModuMaker.

Features

  • Fits a standard ISO ID-1 gift/credit card (85.6 x 54 mm) laid flat, plus folded cash (€5 to €50), or small gifts like earrings or a USB stick

  • Dovetail sliding lid with a slight taper so it closes snug without any glue

  • Hangs from a built-in ear: the lid faces outward and the opening end is on top

  • Raised ribbon, bow, gift tag and holly are separate colour zones: great with AMS or paint

  • Two flat parts, no supports, no hardware

  • ~75 g total, about 3.5 hours

Print settings

Printer / nozzle

Bambu Lab, 0.4 mm

Material

PLA

Layer height

0.2 mm

Walls

3

Infill

15 %

Supports

None

Orientation

As exported: body cavity-up, lid top-up, both flat on the bed

Body size

114 x 73.6 x 19 mm (incl. ear)

Lid size

94.2 x 64.6 x 5.6 mm

Estimate (rough, not a slicer result)

body ~53 g / ~2.4 h, lid ~22 g / ~1 h

Fit tuning: the lid has 0.35 mm side clearance at the open end tapering to 0.10 mm at the closed end, and 0.25 mm vertical clearance. If your printer is tight and the lid binds, scale the lid to 99 % in Y. If it is loose, scale it to 100.5 % in Y. Print the lid first as a quick fit test if you like. The slide fit is designed but not yet test-printed.

Colours

  • Single colour: red looks best; everything still reads thanks to the raised details.

  • Paint-on: box red, ribbon + bow + gift tag gold, holly leaves green, berries bright red.

  • AMS multicolour: body red, ribbon bands (box sides and lid) + bow + tag gold, 3 leaves green, 3 berries red.

Parts list

File

Qty

Colour

gift-box-ornament_body.stl

1

red (+ gold bands)

gift-box-ornament_lid.stl

1

red (+ gold ribbon/bow/tag, green leaves, red berries)

No extra hardware needed. A loop of ribbon or string goes through the ear.

Dimensions and cross-check

Item

Source A

Source B

Design value

Gift/credit card

ISO/IEC 7810 ID-1: 85.60 x 53.98 x 0.76 mm

ISO/IEC 7813 (same card, corner radius 3.18)

cavity 90 x 60 mm, depth 9.1 mm (4.4 mm / 6 mm spare)

€50 note (largest common)

ECB decision: 140 x 77 mm

Finnish central bank page: 140 x 77 mm

folded in thirds 77 x 46.7 mm fits the cavity with 6.5 mm / 13 mm spare

€20 / €5 notes

133 x 72 / 120 x 62 mm (ECB)

fit easily when folded

US dollar

typical 156 x 66 mm

not cross-checked

folded in thirds fits

Slide clearances

0.25 mm vertical, 0.35 -> 0.10 mm side taper

Bambu PLA sliding-fit guideline

Assembly

Print both parts. Slide the lid into the dovetail groove from the ear end until it stops at the far end. Thread ribbon through the ear and hang with the ear on top.

Tags