Counting matching models…
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Print with PETG, without support, z=0,3 100% infill You can use nails or screws. Cable Clip SMALL for cable fi4,8mm, use nail 1,5x20mm Cable Clip Middle for cable fi6,5mm, use nail 2x25mm Cable Clip Large for cable fi10mm, use screew…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts. Lamp…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
Hard to print? Try this one This is another take on the idea of a quick-to-print phone stand to make lots of and put around the house. If you don't need your phone to be elevated and are looking for something that takes up less space,…
A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.
This is a simple Heart-shaped gyro keychain which should print easily on most 3D printers! It would also be a great present for Valentine's Day! I hope you like it! Any feedback is greatly appreciated! Print instructions This model has…
My curious attempt on speedboatrace 3DBenchy - 14 minutes 10 seconds - the white Benchy. It is printed on my slightly modded Ender 3 pro but all the mods are basicaly not affecting the performace (except cooling which you could easily…
15 Minute calibration test. Used to compare Prusa Mk3S, Prusa MINI, Ender 3 Pro, PLA, PETG, ABS, ASA, TPU on youtube. You can see the results here: https://imgur.com/gallery/AVIMRUl The overhangs are 10,20,30,40 degrees. The hex hole is…
It's a spinning top optimized for a good runtime, but without the need for additional parts (like a ball bearing for the tip). My best run was two and a half minutes. Print with 100% infill and random seam placement . Sanding the tip…
The source marked this model as adult content.
These page markers can be used to hold the page to favorite recipes, important pages that you want to refer back to in a book, favorite quotes, and to hold the page for important study material. They are a great way to help annotate a…
Emergency office paper clip set You can choose from four sizes S (3 cm), M (4 cm), L (6 cm) or XL (8 cm). They're not perfectly strong like their metal counterparts, but they'll work as emergency paper clips and you can print them out in…
A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…
I wanted to give my 20-minute phone stand a more interesting design and solve the problem of it being easy to knock over in portrait mode. Making the base hexagonal seemed like the perfect option. As an added bonus, there is now nothing…
Description This is a quick test to do to find out which settings are best suited to print the first layer. Print instructions Just use 0.2 mm of layer height PS: Like if you appreciate, it will help me a lot :)
In Action: https://www.youtube.com/watch?v=Ij9UewAz\_rA The Mechanism: The title of this design (almost long enough to be a Lina Wertmuller film) pretty much says everything one needs to know. It uses an independent wheel (the rotation of…
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
What is the reason in it? Main goal was to make a calibration test as tiny and effective as possible for the common 0.2mm layer height and 0.4mm nozzle. Save as much material as possible Save as much printing time as possible Show useful…
☃ The 90-Minute No-Support Art Deco Snowman Print This Elegant Snowman in Just 90 Minutes! Unveiling the perfect winter decoration that combines speed, style, and simplicity ! This Art Deco Ribbed Snowman transforms a beloved holiday…
DISCLAIMER: THIS IS A HARD KIT. It is a injection molding kit adapted to 3D Printing, not something like Dummy 13 that's designed to be printed. It REQUIRES resin printing to be printed at 100%, for filament printing, the minimal scale is…
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
When my Friends and family members ask about what else can be 3d printed that isn´t a toy, (I mostly print toys and puzzles at home) I show them what I print for work, (mostly tools and gages) that's why this little and useful item came…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 199 mm x 171 mm x 26,8 mm. The dial has a…
Never underestimate the power of collaboration of community. With the help of parts from @Nalif and @soozafone , I added my own base pin and 3mm connectors to make a generalized 3D printable model stand.
Groki is the ultimate chonky companion you didn’t know you needed! This adorable little hippo prints in just 22 minutes and comes ready to waddle into your life with pure squishy energy. With its round belly, tiny feet, and big curious…
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…
Quick, Elegant, and Print-Ready! This is the perfect project for last-minute holiday decorating or for printing a whole batch of festive gifts! This Ribbed Christmas Ornament combines a modern, sleek design with the ultimate convenience…
Watch video tutorial: https://youtube.com/shorts/sTRmoBs0bK8 There are two things we need to change: Right click, edit sketch, double click on the text Type whatever you want, in all caps! If you need a bigger text, adjust the height. Go…
Now it's possible to change your ring every day to match your mood using only ten minutes of your time, a tiny bit of filament and a bit of patience while you change colours every minute or so! You can use the pre-sliced files to create…
Scroll through your social media feed or sit back and enjoy your favorite video content with this universal phone stand. This model only takes 6.81 grams of filament to print, yet it is surprisingly sturdy and stable. The print time is 47…
Here is a Quick last minute gift card holder that is sure to please. I'm calling this an intermediate print as you need to adjust the scale of parts for fitment. My print setting are below. This print is very quick. Print Settings Printed…
First of all, this is not my own design . If you like it, please send a tip to NirDobovizki . Having identified some drawbacks in the original design regarding easy printability I pulled the STL on TinkerCAD and took a few minutes of my…
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
Description I proposed to my wife so spontaneously that I couldn't get the engagement ring until later. To prevent this from happening to you, I have designed a 3D printable ring that you can hold in your hands in about 15 minutes! For…
25 minute Benchy G-Code for MK4. this was uploaded before input shaping was enabled. at 25 minutes, you can clearly see the “prusa slicer” hull line. I am not a speedboat specialist, but someone asked me for the file :)
These are clock-hands inspired by the Rolex Submariner, suitable for my Clock Face Rolex Submariner style . Hour hand: Length: 69mm, designed for a 5mm shaft. Minute hand: Length: 43mm designed for a 3mm shaft . The shaft diameter are (as…
I have a problem - it's difficult to demonstrate a 3D printer to your guests - you show them the printer, send a small print, and .... it will be ready after they leave. So I designed this model with the explicit purpose of being able to…
Do you need a last minute gift? This might help you :-) All you need is a photo. You can resize the model to all photo sizes. I hope you like it and you can use it. In Germany you can print at most “dm-drogerie markt” for 50cent a 15x20cm…
I recently changed the motherboard and screen on my original Ender to the BigTreeTech SKR Mini V3. It was a SUPER easy upgrade!!! So far a LOVE the touch screen, the silent stepper drivers, the easy in updating firmware, the ability to…
I found myself printing huge test models to figure out the correct settings for a M600 colour-change. After a couple of frustrating tries i decided to construct this mini-test print. It works flawless. Colour-change at layer 11 in prusa…
My seedlings were constantly being eaten. I tried covering them with cloches made from plastic bottle cutout. But, whenever there is a warm sunny day, the seedling would get cooked and die. I have created this Seedling Cage in hope that…
First layer test for 0.4 mm nozzles. FIRST LAYER HEIGHT MUST BE 0.2 mm
A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…
A super quick and convenient book mark, that serves as a spine-pull for your favourite books.
miss minutes clock modeled to look like the main look/pose from the show cut out channels added for led in version 2 of model to allow for lighting to be ran with translucent orange pla.
Quick way to test your bridging capabilities and re-calibrate/tune your printer in minutes. Say NO to fancy complex models that take 30+ minutes to print, this one prints in 5 minutes!
This model is a test print to test if your elephant foot compensation settings are working properly. This design has varying interior and exterior angles which makes it perfect for elephant foot testing. PRINT SETTINGS: Bottom Layers: 3…
Elevate your winter style with our Snowflake Earrings or Ornament! These intricate snowflakes are designed to be the perfect addition to your festive look. Printed to a size that's ideal for earrings, they can easily be assembled with…
Sub 10 minute printing basic retraction test.
note: the file does not open in prusa slicer, but it works in bambu studio. Also It may not print that fast on older printers because of the printing speeds
I would put down glue stick, and also increase fan speed a little bit. I find this really useful for printing functional parts, the chain photo was printed in just under 3 hours on my MK3S+, and it would have taken over 7 without this…
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Start with the 3x3 and once that looks good move on to the 5x5. I printed at .3 mm layer height and turned off “fill gaps” to make things go faster. “Bed level correct” was the setting adjusted on the printer. - will bring the nozzle…
Overview This is V2 of the original model. A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place , requires no supports , and finishes in about…
Support and Feedback: If you like the design, you can buy me a coffee here: https://www.buymeacoffee.com/kazikg Encountered any issues or have suggestions? Feel free to leave a comment below. I'm here to assist and continuously improve…
Print off a piece of history, one of the greatest ideas, can now be printed in less than 10 minutes and only uses 1 gram of filament!! A Great Documentary About The Komet… Support Dark Skies by subscribing for this great documentary For…
The day before christmas, all the stores are closed and you have not found the present for your mother. That is not a problem because you are a maker and you got solid FFF and pretty PLA. Everybody needs a lamp, and pretty ones will be…
Valve cover for "dunlop/Woods" Valves. Ventilkappe dunlop ventil.
This model replaces a standard shopping cart coin — no more digging through your pockets. It prints in just 13 minutes and uses only 1.29 g of filament . ✔ No supports required ✔ Very easy to print ✔ Lightweight and practical ✔ Can be…
Most filament saving rgb-led remote holder you will probably find. Deisgned to be printed with 0.2mm Layerheight and 0.4mm Nozzle . Also made a variation for 0.3mm but this one uses slightly more filament (3.6g vs. 3.08g) - on the other…
A phone stand that prints in 25 minutes with default vase mode settings, but if you increase the speed to 80mm/s, disable cooling, disable minimum layer time, it is printable in 8 minutes.
Reprint the 59s Benchy Print 0.2 layer height 10% infill organic tree supports
This guitar pick takes on the form of a fierce alien head, complete with cutout eyes, nostrils, and deep forehead ridges that add bold texture and grip. It’s more than just a functional pick—it’s a conversation piece that stands out on…
A small kids toy with no other function than to boost imagination Designed to be printed flat without supports except for the hand's arrow
Top part of face shield. Compatible with Prusa Face Shield. full height (20 mm) 0.4 mm nozzle (E3D v6) 0.2 mm layer prints in ~33 minutes per piece ! Add 2nd stack (20 pcs) for total print time 11 hours - 640 g (overnight printing). Print…
A playful nod to childhood memories: The instantly recognizable red icing and green sprinkles evoke the familiar sight of the iconic treat, triggering warm memories of childhood Christmases and bringing a smile to everyone's face. Ditch…
Dieses Modell ist identisch mit dem wirklichen überragendenem Design von Nicki . Allerdings unterteilt in zwei Teile so dass diese zwar ggf. zusammengeklebt werden müssen aber ohne ständigen Filament Wechsel. Für uns war es sehr hilfreich…
Please like this model if you find it useful. A few likes goes a long way so I can make more. Thanks :) Any of the following sound like you? z-offset changes every print! Probe does not seem to work First layer is terrible but it was…
While experimenting with different instruments, we accidentally ended up with this simple instrument. We tried different sizes but we liked the sound of the uploaded model. Feel free to experiment with different sizes and enjoy your desk…
Ultra thin and minimalist bookmark & phone stand. Very short print time (13 minutes) and plastic consumption (2.87 grams). Stand convenient to carry - especially if you like to read. The stand allows you to slightly adjust the angle of…
A quick moon phase bookmark. Print at .2 layer height and program a filament change at 1.2 for a cool effect with the moon phase cutout. You might consider turning ironing on, but we did not, because I just needed a quick bookmark to hold…
This model is a replacement for a zipper pull tab. It holds in place preety well, is durable even when printed with pla, does not really require glue. Print with at least a little flexible filament as it needs to flex in order to close…
Please use the new version of This Model Overview A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place , requires no supports , and finishes in…
Top part of face shield. Compatible with Prusa Face Shield. full height 0.4 mm nozzle (E3D v6) 0.2 mm layer prints in ~33 minutes ! This is a remix but I cannot find author of the .scad model. Print instructions There is a diagonal cut in…
Introducing a mechanical digital clock with numbers strangely arranged. Technical highlights Usually, intermittent motion mechanism such as Geneva drive is necessary to decrease the number of the motors of mechanical digital clock.…
I had to adjust the hour and minute hand's holes to snuggly fit the clock mechanism that I bought on Amazon. Figured this will save someone the time it took me to tinker with this. Here is a link to the clock mechanism I bought (5/8):…
This a is a very simple remix on the 10 minute robot, I feel they needed the ability to hang on to eachother.
A both clever and easy way to mark the exact sentence where you finished your reading, or just to know the passages you want to highlight. Just one minute or even less to print! Both PLA and PETG works. Tip : use different colors to…
Fun dangling earrings with three-color mushrooms. Utilize filament changes for color change to achieve a multicolor print with a single extruder. We included two versions (one for each ear) so they frame your face better. Size up or down…
Quick Facts Design: Antlers sized to fit Labubu figures—snap attachment, no glue or tools needed. Speed: Complete print in 31 minutes 42 seconds —perfect for last-minute holiday printing. Function: Adds festive personality to Labubu…
What do you do with this less than a meter worth of filament? Print this little buddy! It takes just 10 minutes, and vase mode prints are always cool to watch and touch. Then play with it or give it to children for them to have fun (not…
Change History Update (4-06-26): (Optional) Added a blank analemma plate for those who want to experiment with their own analemma curves & text. Check the file folder: Blank Analemma Plate. Update (12-07-26): The file…
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
Hello! This tire chock was made because my collection of Lego Speed Champion Cars kept rolling of their shelf (which I should have just fixed). I figured that maybe some other people might have the same problem or might just use them as…
Replacement fan knob for Intermatic SW60MWK 60-Minute Spring Wound Timer, White
Two versions of boxes for business cards. Printing is very fast.
Just another simple bed level test.
Encontre este modelo en tingiverse pero no lo he vuelto a encotrar para ponerlo como referencia. Lo modifique y agregue el hueco para las llaves. I found this model from thingiverse, but I cant found again to reference it. I've modified…
A keychain 4.5cmx4.5cmx0.33cm size from video game Fallout 4
A Miss Minutes drink coaster I made. The coaster itself is 100mm inside diameter with a 2mm high lip around the outside. Each color is separated into their own file for printing and assembly with some CA or Super Glue. Designed in Fusion…
just add a pause at the layer heights and change the filament color try it do it in petg as I have had issues with pla and my fish DO NOT USE ABS OR MARKERS AS IT, KILLS THE FISH (I learnt the hard way )
Changed the side angle of the the (4 tab) Prusa Face Shield to be more comfortable on the head. Design was also optimized for a large nozzle - namely the 1.2mm MOAStruder on the Taz 6. 1 part prints in 11 minutes. 4 parts an hour! V12:…
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
Description I proposed to my wife so spontaneously that I couldn't get the engagement ring until later. To prevent this from happening to you, in last year valentine contest I have designed a 3D printable engagement ring that you can hold…
