OSCR HW5 Case (Sanni Cart Reader)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D-printable case for the Open Source Cartridge Reader (OSCR) HW5.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
OSCR HW5 Case (Sanni Cart Reader)
This is a 3D-printable case for the Open Source Cartridge Reader (OSCR) HW5.
The main features are a more solid feel when turning and pressing the rotary encoder, and a case design tailored to my personal preferences.
This case was designed around my own OSCR unit, so dimensions such as the spacers between the PCBs may vary between builds. Please adjust the design to fit your unit if necessary (STEP files are included).
BOM
Part | Qty |
|---|---|
M3 socket head cap screws, 15 mm | 4 |
M3 socket head cap screws, 8 mm | 5 |
M3 heat-set threaded inserts, OD 4.5 mm × L 4 mm | 9 |
Existing PCB mounting screws (reuse) | 8 |
About the Photos
I used transparent PETG to recreate the look of the translucent game consoles of the '90s.
The cover and middle frame were printed with a 0.8 mm nozzle, 0.4 mm layer height, 0.8 mm line width, 1 wall, and 0% infill.
The knob body was printed with 4 walls and 100% infill to give it some weight and rigidity.
The remaining parts were printed with a 0.4 mm nozzle, 0.2 mm layer height, 4 walls, and 0% infill.
All parts can also be printed with regular PLA using a 0.4 mm nozzle.
Disclaimer
The game consoles, cartridges, and controllers shown in the photos are included to illustrate compatibility and design inspiration. All product names and trademarks belong to their respective owners. This project is not affiliated with or endorsed by any game console manufacturer.
OSCR HW5 ケース (Sanni Cart Reader) 日本語
Open Source Cartridge Reader(CartReader)V5 の3Dプリントケースです。
ロータリーエンコーダーの回す、押す操作に剛性感を持たせたこと、自分好みのデザインにしたことが特徴です。
私の持っていたOSCRをベースに設計しているため、基板間のスペーサーの高さなどがオリジナルと異なるかもしれません。適宜あなたのOSCRにあわせて修正してください(STEPファイルを公開しています)。
BOM
部品 | 数量 |
|---|---|
M3キャップボルト 15mm | 4 |
M3キャップボルト 8mm | 5 |
M3インサートナット | 9 |
既存の基板固定ネジ(再利用) | 8 |
掲載写真について
"あの頃" のスケルトン具合をイメージして透明PETGを使っています。
カバーと中間フレームは0.8mmノズル、積層高さ0.4mm、線幅0.8mm、Wall 1、Infill 0%で印刷しました。
ノブ本体はWall 4、Infill 100%とし、重量と剛性を持たせています。
その他の部品は0.4mmノズル、積層高さ0.2mm、Wall 4、Infill 0%で印刷しました。
もちろん一般的なPLA、0.4mmノズルでもすべての部品を出力できます。
免責事項
写真に登場するゲーム機、カートリッジ、コントローラーは、対応機器やデザインの背景を紹介するために掲載しています。各製品名・商標はそれぞれの権利者に帰属し、本作品は各ゲームメーカーの公認・提携を受けたものではありません。