1 / 6
T-Handle Bit Driver — Magnetic 1/4″ Bit Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
magnetic Hand bit driver
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 41
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep a useful bit driver close at hand. This compact T-handle gives you a cross-grip for light manual tightening and uses common 1/4-inch hex screwdriver bits.
Assembly
The round magnet sits in a pocket at the bottom of the hex socket, behind the bit. The magnet must be glued in place. Use a round 5 mm diameter × 2 mm thick magnet. Apply a small amount of two-part epoxy or cyanoacrylate (super glue) in the magnet pocket or onto magnet. Let it cure fully before inserting a bit. The magnet helps retain the bit; the hex walls transfer turning force.
