Hinged Diesel Additive Bottle Case with Removable Funnel Holder

Note: these files are digitally sliced and checked only. This design has not been test-printed or fit-tested yet, so measure your bottles before you print.

**Two diesel additive bottles and a funnel, one latched case to keep them together in the cab.**

An original Handyfab parametric design: a hinged, dual-latch storage box for two sealed diesel fuel additive bottles plus a removable funnel holder, for the cab, the bed toolbox or the garage.

### What you get

STL, STEP and Bambu Lab P1S project 3MFs for:

- case body (with lid gasket channel)

- plain lid

- hinge pins

- recommended tighter latch levers (+0.15 mm cam pad)

- original latch levers as a fallback

- funnel holder / drip-tray cradle

**Funnel not included.** Get the Small Diesel Rev2 / 24 mm nozzle funnel here: https://makerworld.com/en/models/816012. Our holder is original geometry sized to that funnel class, not a remix of the funnel mesh.

### Fits

- Bottle lane sized for measured envelopes of about **117.5 × 51.2 × 30.1 mm** (length includes the cap; bottles lie on edge).

- Interior 240 × 117.5 mm · closed case about 249 × 151 × 75 mm.

- **Measure first.** Fit is based on dimensions only.

### Print settings

- PETG filament · Bambu Lab P1S · 0.4 mm nozzle · Textured PEI · 0.20 mm layers · 6 walls · 100 % infill

- **No supports** · 3 mm outer brim

- Slicer estimates: body ~5.9 h / 269 g · lid ~3.9 h / 180 g · funnel holder ~2.2 h / 75 g · typical first build **about 13 h and 540 g**

- The project files embed the settings. Re-slice in your own slicer and inspect before printing.

- Print profiles and time/gram figures are for a Bambu Lab P1S (0.4 mm nozzle, Textured PEI), sliced in OrcaSlicer. Not affiliated with or endorsed by Bambu Lab or OrcaSlicer.

### Latches

The recommended levers add a +0.15 mm cam pad designed for a firmer detent (not yet print-tested). Fit the tighter lever on the **right** side first (as you face the latches). The original levers are included if it feels too stiff.

### FAQ

- **Will my bottles fit?** Measure them: up to about 117.5 × 51.2 × 30.1 mm including the cap.

- **Funnel?** Separate free download, linked above.

- **Supports?** None on any plate.

- **Leakproof?** No. Storage for sealed bottles only; not a certified fuel container. No strength or chemical claims.

- **Printed yet?** **Digitally sliced and checked** (CAD + slicer: 0 warnings, manifold meshes). Not yet physically fit-tested as this public package.

Design by **Handyfab**.

Measure your bottles, download free and print it this weekend. If it tidies your cab, post a Make, or tip what a coffee costs.