Mouse Ear Band Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mount to display your mouse ear headbands. If you've been to Disney then you probably have a couple ear-bands,…
- Rating
- 4.5 / 5
- Likes
- 44
- Downloads
- 123
- Makes
- 2
- Views
- 848
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A wall mount to display your mouse ear headbands. If you've been to Disney then you probably have a couple ear-bands, or maybe you just have some other fancy headbands you want to display. This mount will let you put any headband onto your wall for storage and display.
It's 2 pieces, screw the back plate to the wall where you want it, then snap in the front plate. To remove from the wall just give the front plate a firm tug and it should pop loose, allowing you to access the back plate to unscrew.
You shouldn't really need supports but if you want to use them it'll only happen in the latch holes, and those should pop out easily.
Recommend you print this 100% infill or use enough perimeters and top/bottom layers that infill isn't necessary. Should still be a quick print.
Layer height can be whatever you want, finer layers mean smoother snapping and stronger part.
Occasionally the tabs can snap off. Of the 8 i printed only 1 snapped and that was from putting angled pressure on the part when clipping the two pieces together. It still works even with a tab missing though so no big deal. You may have more/less success depending on your filament and how brittle it ends up when printed.
Category: Decor