1 / 5
Märklin H0 modular Bridge with Railing Rail-C 172mm Straight Element (multi-part) / Märklin H0 modulare Brücke mit GeländervGleis-C 172mm Element gerade (mehrteilig) — image 1
1 / 5

Märklin H0 modular Bridge with Railing Rail-C 172mm Straight Element (multi-part) / Märklin H0 modulare Brücke mit GeländervGleis-C 172mm Element gerade (mehrteilig)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.13 – €1.38 net (excluding VAT)

For file: H0_Bruecke_gerade_172mm_railg_multipart_2xCoverRailg_0.2mm_PLA#5_MK3SMMU2S_1h20m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.26 excluding VAT (range midpoint).

Weight reported by the author
14 g
Print time reported by the author
1.34 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Straight 172mm rail element with railing of modular bridge system for H0 model railway rail-C.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Motivation

When building a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.


For a more realistic look of a railway bridge, I designed a rail element for the straight Rail-C 172mm rails.
The bridge element has a paved pathway on both sides of the railway track ... and this version also provides additional railings on both sides of the rail support element.
The elements fit on top of the modular Bridge pillar system and can be connected with snap-in-connectors.


The design leaves enough tolerance for the changing slopes needed for the bridge ramps.

The Märklin Rail-C system is intended to be used with for use with our design.

Print

Printed with prusament PLA (Gentleman's Grey)
To build a complete ramp or bridge with ramps, you need quite a number of pillars and rail elements.
For one complete straight modular bridge Rail-C 172mm support element (multi part) you need to print the following components:
  1x H0_Bruecke_gerade_172mm_Basis_v01.stl (base element)
     (support:                  not required)
     (brim:                       not required for satin or smooth sheet)
     (print orientation:   upright)
     (colour:                    Gentleman's Grey)


  2xH0_Bruecke_gerade_172mm_Gelaender_v00.stl (paveway railing left/right) 
     (support:                  not required)
     (brim:                       not required)
     (print orientation:   side facing downwards, smooth or satin metal sheet)
     (colour:                    Gentleman's Grey)


  2x H0_Bruecke_gerade_172mm_AbdeckungGelaender_v00.stl (paveway left/right) 
     (support:                  not required)
     (brim:                       not required)
     (print orientation:   top face facing downwards, structured metal sheet)
     (colour:                    Grey)


  option (paveway without railing):
     H0_Bruecke_gerade_172mm_Abdeckung_v01.stl (paveway left/right) 
     (support:                  not required)
     (brim:                       not required)
     (print orientation:   top face facing downwards, structured metal sheet)
     (colour:                    Grey)


  2x H0_Bruecke_Verbinder_v01.stl (snap-in-connector)
     (support:                  not required)
     (brim:                       not required for satin or smooth sheet)
     (print orientation:   left or right side)
     (colour:                    Gentleman's Grey) 

Assembly

[Straight Rail-C 172mm Support Element complete]
The straight Rail-C 172mm rail support base element is printed as one part.
Then you need to place the paveway parts in the top side of the base element (left and right).
Simply place the paveway parts (left+right) in their related positions on the base element and carefully push in the snap hooks. Take care that the slot and openings for the railing face outwards.
(the paveway parts are identical and do fit into their related position in any orientation with hooks facing down)


Now push in the railings:



This gives a nice impression of a bridge construction with paved walkways and railing left and right of the railway track. 

The snap-in-connectors go into the small openings (left+right) at the ends of the rail support element.
The connected rail support elements fit on top of the pillar system.




The Märklin straight Rail-C element 172mm is simply placed in the center position.


Play & Enjoy!!!

Tags