Adaptive Motion IMU enclosure for SimHub motion rigs (ProMicro nRF52840 + MPU-6050)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bolt-on box for a USB-C motion sensor (ProMicro nRF52840 + GY-521) on 40-series profile, with multi-colour lid
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Enclosure for the Adaptive Motion IMU: a small USB-C motion sensor that measures how your sim rig really moves, for SimHub motion rigs. It holds a ProMicro nRF52840 (nice!nano v2 clone) and a GY-521 (MPU-6050) and bolts to 30/40-series aluminium profile with two M6 bolts.
The box is 68.3 x 27.6 x 17.8 mm. The lid carries the Sim-Spares logo, SIM-SPARES.COM and an UP / LID = FRONT marking as a 3-colour inlay.
Files
adaptive_motion_imu_print.3mf: PrusaSlicer project with base, lid and the three inlays, filaments already assigned (MMU3)
base.stl: side mount, flange with two M6 slots 32 mm apart, box along a horizontal profile
base_across.stl / base_along.stl: alternative bases, across a vertical upright or with ears at both ends
lid.stl + lid_inlay_green/orange/white.stl: lid and artwork, load together (same coordinates)
lid_inlay.stl: all artwork as one part for a single inlay colour
adaptive_motion_imu_enclosure.scad: parametric OpenSCAD source
Printing
PETG, about 30 g. Layer height 0.2 mm, Arachne perimeter generator (needed for the small text). No supports needed. The lid prints top-down on the bed: the artwork is the first 0.6 mm, so the MMU only changes colour during three layers. Single colour works too.
Hardware
4x M3 x 5.7 mm heat-set inserts (4.0 mm hole) in the lid lugs
4x M3 x 10 ISO 7380 button head lid screws
2x M2.5 x 6 self-tapping screws for the GY-521
2x M6 x 16 DIN 912 + washers, 2x M6 slot-8 T-nuts
2x 2.5 mm cable ties for USB strain relief
Firmware, the free SimHub plugin, build manual and wiring: https://sim-spares.com/downloads/ and https://github.com/Haarie/adaptive-motion-imu
A ready-built unit or a printed kit with hardware is available at https://sim-spares.com/adaptive-motion-imu/
Post a make if you build one!
