FEETS for RatRig Mesh 3030 Enclosure Cuboid
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.66 – €3.25 net (excluding VAT)
For file: RATRIG Mesh 3030 FEETS_0.2mm_PLA_MK3S_3h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.96 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 3.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
10mmm feets for RatRig 3030 Mesh enclosure. Get space for wires, homogeneous air flow and avoid sratchs.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 1
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Feets for 3030 Mesh Cuboid enclosure from RatRig
I have bought this Mesh 3030 Enclosure Cuboid from RatRig :
https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html
But it comes without feet…
3030 extruded aluminium can easy scratch your desk when you slide the enclosure.
I designed fasteners 10mm feets to prevent it and get space for wires and air flow.
Fastener part
90° rotation to clip the feets.
It's a fastener extrusion design, you don't need any tool to install or remove it.
You enjoyed this part?
Publish your print and support me with a 5 stars and a like !
Pieds pour caisson Mesh Cuboid de chez RatRig en profilé 3030
J'ai acheté le caisson Mesh Cuboid de chez RatRig en profilé 3030 pour mon imprimante 3d :
https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html
Mais il est livré sans pied…
Les extrusions 3030 en aluminium peuvent facilement rayer la surface sur laquelle est posée votre caisson.
J'ai dessiné des pieds "fasteners" de 10mm afin d’empêcher les rayures et avoir de l'espace sous le caisson pour les câbles et avoir un flux d'air régulier et homogène.
Fastener design
Une rotation de 90° permet de clipser les pieds.
Vous n'avez besoin d'aucun outils pour installer ces pieds et les enlever.
Le caisson n'a pas besoin d'être démonté.
Vous aimez cette pièce ?
Publiez votre impression et aidez moi avec un j'aime et 5 étoiles !