50-75mm Micrometer Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.66 – €6.92 net (excluding VAT)
For file: mk3_pla-50-75mm-mic-box-lid.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.29 excluding VAT (range midpoint).
- Weight reported by the author
- 87 g
- Print time reported by the author
- 5.9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A micrometer case for a Mitutoyo micrometer - it may fit other brands, but you will need to check fit / sizing.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 92
- Makes
- 0
- Views
- 960
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A micrometer case for a Mitutoyo micrometer - it may fit other brands, but you will need to check fit / sizing.
Print instructions
Use a brim to prevent warping
2x2mm rare earth magnets are glued into the holes on lid and base
Hinges should have appropriate sized drill run through them to clean them up
Hinges held together with lengths of 1.75mm filament.